NAD C 546BEE C546BEE Folheto
Códigos do produto
C546BEE
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of
NAD Electronics International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form
whatsoever without the written permission of NAD Electronics International. © 05/12 11-064 NAD Electronics International.
www.NADelectronics.com
Specifications
GENERAL
C 546BEE
Output Level Analogue
Optical
Coaxial
2.2 ±0.2V
0dB (ref 2.2V)
500 ±150mV
Frequency Response
5Hz - 20kHz ±0.5dB
Total Harmonic Distortion
0.0035%
Signal/Noise Ratio
118dB (ref. 1kHz, A-weighted LPF Stop, Pause)
Channel Balance
±0.5dB (ref. 0dB 1kHz)
Dynamic Range
95dB
Channel Separation
>110dB
De-emphasis
<0.5dB
Linearity
±0.5dB 0 to -90dB
USB
Frequency Response
±1dB (ref. 0dB 20Hz - 16kHz)
Total Harmonic Distortion
<0.03% (ref. 0dB 1kHz, Audio LPF)
POWER CONSUMPTION
Standby Power
<0.5W (120V/230V)
Idle Power
9W
DIMENSION AND WEIGHT
Unit Dimensions (WxHxD) - Gross*
435 x 89 x 307mm
17 1/8 x 3 9/16 x 12 1/16 inches**
Net Weight
4.9kg (10.8lb)
Shipping Weight
6.3kg (13.9lb)
* Gross dimensions include feet, extended buttons and rear panel terminals.
** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers,
cabinet makers, or other end users based on information contained in this document.
Note: Installers should allow a minimum clearance of 55mm for wire/cable management.
Total Depth 307mm
C 546BEE
Total Width 435mm
Total Height
89mm