ZyXEL VMG8324-B10A Manual Do Utilizador

2

Wireless
• IEEE 802.11n 2.4 GHz with up to 300 Mbps 

data rate

• Wireless Protected Setup (WPS)
• WEP data encryption (64/128 bit)
• WPA/WPA2, WPA-PSK/WPA2-PSK
• Wi-Fi scheduling
• Multiple SSID (up to 4)

VDSL and ADSL Compliance
• VDSL/ADSL2+ compliance
• VDSL2 (G.993.2), band plan Annex A, Annex B 

(over POTS)

• Support profile 8a, 8b, 8c, 8d, 12a,12b, 17a
• VDSL1 (G.993.1)
• ADSL2+ (G.992.5) support Annex A, I, M
• ADSL2 (G.992.3) support Annex A, I, L, M
• ADSL (G.992.1) Annex A
• ANSI T1.413 issue 2
• G.INP (G.998.4)
• G.vector (G.993.5)

VLAN/QoS
• Support flexible traffic classification
• 6-bit DiffServ Code Point (DSCP, RFC 2474)
• 802.1P 3-bit Class of Service (CoS)
• 802.1Q 12-bit VLAN ID

Router/Bridge Features
• IEEE 802.1d transparent bridge
• PPP over Ethernet (RFC 2516)
• MAC encapsulation routing/IPoE
• Network Address Translation (NAT)/Network 

Address Port Translation (NAPT)

• NAT server (Port forwarding)
• DHCP client/server/relay
• DNS proxy/dynamic DNS
• Static route/policy routing
• IGMP v1, v2
• IP protocol v6 (IPv6)

Voice Functionality
• SIP v2 (RFC 3261)/SDP (RFC2327/3264)
• RTP/RTCP (RFC1890)
• Codec: G.711, G.726, G.722
• G.168 echo cancellation
• Voice Activity Detection (VAD)/Comfortable 

Noise Generator (CNG)

• Dynamic jitter buffer
• Dual Tone Multi Frequency (DTMF)
• CLIP/CLIR

Phone Features 
• Caller ID (FSK.DTMF) 
• Call forwarding (No condition, Busy, No 

answer)

• Call transferring (Blind, ConsultOnHold, 

Attendant)

• Three way conference
• Conference-DSP local mixer
• Interactive Voice Response (IVR)
• Flash hook timer
• Message waiting indicator (RFC 3842)
• T.38 fax relay
• Transparent fax rely over G.711
• Flexible dial plan (RFC3525 section 7.1.14)

Security
• Firewall
• Generic packet filter
• DoS attack prevention
• Parental control

USB
• File sharing
• 3G backup

Management 
• Web GUI (HTTP/HTTPS)
• Command Line Interface (CLI)
• Firmware upgrade via HTTP/FTP/TR-069 
• DSL forum TR-069/TR-098/TR-111/TR-064
• 802.1ag Connectivity Fault Management 

(CFM)

• WAN:
 

■

 One RJ-11 interface for VDSL (over POTS)

 

■

 One RJ-45 connector for Giga-Ethernet WAN  

  port

• LAN: Four 10/100/1000M Auto MDI/MDI-X 

RJ-45 ports

• Wireless: Two internal 3 dBi antennas (2.4 

GHz)

• Button: 
 

■

 One reset button

 

■

 One WPS on/off switch button

 

■

 One WLAN on/off switch button

• One LED on/off switch
• Two FXS ports 
• Two USB 2.0 host ports
• Status LEDs indicators: PWR/SYS, DSL, 

INTERNET, WAN, ETHERNET, WiFi 2.4G, 
Phone1, Phone2, USB1 and USB2

• Power supply: 12 V DC 1.5 A

• Item dimensions (WxDxH): 
  206 x 181 x 35 mm (8.11” x 7.12” x 1.38”)
• Item weight: 510 g (1.13 Ib.)
• Packing dimensions (WxDxH): 
  325 x 245 x 66 mm (12.79” x 9.64” x 2.6”)
• Packing weight: 1,040 g (2.3 Ib.)

Operating Environment
• Temperature: 0°C to 40°C
• Humidity: 20% to 85% (Non-condensing)

Storage Environment
• Temperature: -30°C to 60°C
• Humidity: 20% to 90% (Non-condensing)

• EN61000-3-2, EN61000-3-3, EN55022 Class B

Safety
• EN60950-1