Vantec 2S1P UGT-PCE2S1P Folheto
Códigos do produto
UGT-PCE2S1P
Compliant with PCI Express Base Specification 1.1
Supports 2 x UART serial ports
Built-in 16C450/550 compatible UART
On chip 256 byte FIFOs in transmit and receive path of each serial port
Data transfer rate up to 230400bps
Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) &
Enhanced Capability Port (ECP)
Parallel data transfer rate up to 1.5 Mbps
Supports 2 x UART serial ports
Built-in 16C450/550 compatible UART
On chip 256 byte FIFOs in transmit and receive path of each serial port
Data transfer rate up to 230400bps
Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) &
Enhanced Capability Port (ECP)
Parallel data transfer rate up to 1.5 Mbps
The Vantec 2S1P PCIe Serial & Parallel Combo Host Card is the easiest way to add extra serial and parallel ports to any computer.
Compliant with PCI Express base specification 1.1, this host card will allow you to plug in three different (2 serial and 1 parallel) devices
to a computer whether it be a scanner, modem, digital camera, PDA, or printer.
Introduction:
Specifiactions:
System Requirement
Package Contents
Send us an e-mail at: inquiry@vantecusa.com
All Registered Trademarks Belong To Their Respective Companies Copyright © 2012 Vantec Thermal Technologies. All Rights Reserved.
www.vantecusa.com
Model:
Bus Interface:
Ports:
Bus Interface:
Ports:
Dimensions:
UGT-PCE2S1P
PCIe
2 Serial Ports (DB9 Male)
1 Parallel Port (DB25 Female)
120 x 81 x 19 mm
PCIe
2 Serial Ports (DB9 Male)
1 Parallel Port (DB25 Female)
120 x 81 x 19 mm
Microsoft Windows XP, Vista, 7, & 8 (32/64bit)
PCI Express Enabled System w/ Available PCI Express Slot
CD-Rom Drive May Be Needed For Drivers
Vantec 2S1P PCIe Serial & Parallel Combo Host Card
User's Manual
Driver CD
Low Profile Brackets
User's Manual
Driver CD
Low Profile Brackets
Combo Hos
t Car
d