Philips HTL2153B HTL2153B/F7 Manual Do Utilizador

10 EN

Note

 

•

This product may not be compatible with certain types 

of USB storage device.

 

•

If you use a USB extension cable, USB HUB, or USB 

multi-reader, the USB storage device may not be 

recognized.

 

•

Digital camera PTP and MTP protocols are not 

supported.

 

•

Do not remove the USB storage device while it is 

being read.

 

•

DRM-protected music files (MP3, WMA) are not 

supported. 

 

•

Support a USB port: 5V  , 1A.

Auto standby

When playing media from a connected device, 

the SoundBar automatically switches to standby 

after 29 minutes of button inactivity and no 

audio/video play from a connected device. 

Set display brightness

You can press DIM repeatedly to select a 

different brightness level of the display panel on 

this product.

Apply factory settings

You can reset this product to the default 

settings programmed at the factory.

1 

In any source mode, within three seconds 

press - (Volume), BASS - and TREBLE -.

 

»

When the factory settings restore is 

complete, the product automatically 

switches off and restarts.

5  Update software

To get the best features and support, update 

your product with the latest software. 
What you need

•  Connect this product to your TV through 

HDMI.

Check software version

In HDMI ARC source mode, press TREBLE -, 

BASS - and - (Volume) on the remote control.

Update software via USB
1 

Check the latest software version on 

www.philips.com/support.

•  Search for your model and click on 

"Software and drivers".

2 

Download the software into a USB storage 

device.
a 

Unzip the download if zipped, and 

make sure that the unzipped file is

named "HTL2153.BIN".

b 

Put the "HTL2153.BIN" file in the

root directory.

3 

Connect the USB storage device to the 

 (USB) connector on this product.

4 

Switch this product to the HDMI ARC 

source, and switch your TV to the HDMI 

source.

5 

On the remote control, within 6 seconds 

press   twice, and  + (Volume) once, then 

hold down SURROUND ON.

 

»

If an upgrade media is detected, on the 

TV screen you are prompted to start 

the update.