Philips Cloud Monitor Base SB4B1927VB SB4B1927VB/00 Manual Do Utilizador

Códigos do produto

SB4B1927VB/00

7. Troubleshooting & FAQs

7.1 Troubleshooting

This page deals with problems that can be

corrected by a user. If the problem still persists

after you have tried these solutions, contact

Philips customer service representative.

Common Problems

No Picture (Power LED not lit)

• Make sure the power cord is plugged into

the power outlet and into the back of the

monitor.

• First, ensure that the power button on the

front of the monitor is in the OFF position,

then press it to the ON position.

No Picture (Power LED is White)

• Make sure the cloud monitor base is

turned on.

• Make sure the signal cable is properly

connected to your cloud monitor base.

• Make sure the monitor cable has no bent

pins on the connect side. If yes, repair or

replace the cable.

• The Energy Saving feature may be activated

Screen says

Attention

Check cable connection

• Make sure the monitor cable is properly

connected to your cloud monitor base.

(Also refer to the Quick Start Guide).

• Check to see if the monitor cable has bent

pins.

• Make sure the cloud monitor base is

turned on.

Visible signs of smoke or sparks

• Do not perform any troubleshooting steps
• Disconnect the monitor from mains power

source immediately for safety

• Contact with Philips customer service

representative immediately.