Alto TS112A 816311010016 Folheto

Códigos do produto
Página de 2
All information subject to change.
p 401-659-8135  |
These are the cornerstones of the TRUESONIC speaker line, which 
provides exceptionally transparent sound for musicians and live 
sound engineers alike. TRUESONIC speakers enlist their ultra-pure 
signal path, super-efficient driver design, and durable, lightweight 
polypropylene enclosures to deliver precise reproduction of 
deep lows, crystal-clear high-end and smooth mid-range. With 
TRUESONIC, what you put in is exactly what you get out.
The TS112A features modern Class D amplification integrated 
into the cabinet. Class D amps are generally lighter than Class 
A and AB amplifier designs and offer substantial power for nearly 
any application; the TS112A delivers 800 Watts of Class D power. 
Both the 12” low frequency and 1” high frequency drivers in the 
TS112A are designed to make sure that virtually no energy is 
wasted. That translates to more of the power from the amplifier 
actually working to generate sound rather than heat, giving the 
TS112A better real-world performance than other loudspeakers 
with comparable published specifications. Inside and out, every 
component of the TS112A was developed to provide accurate, 
transparent, powerful sound.
125 dB peak, 122 dB continuous
12” Woofer, with 2” voice coil
2.5 kHz
25.5” x 15.1  x 14.4” (648 mm x 383 mm x 365 mm)
• Small/mid-sized PA systems
• Halls, auditoriums, amphitheaters
• Bars, restaurants, clubs
• Gymnasiums, fitness centers, and dance studios
• Houses of worship
• Mobile DJ systems and weddings
• Special events, and presentations
• Rentals 
• 800 Watts Class D power
• 12” low frequency transducer, 1” neodymium driver
• 2 Mic/Line combo inputs with independent volume controls 
• XLR output to link speakers
• Lightweight, trapezoidal cabinet with handles
• 100º x 60º Long throw coverage field
• Stand/pole mountable or flyable
• Clip Limiter with Red LED
• Ground Lift switch
• Contour switch for increased EQ control 
• Accurate audience coverage, not just on-axis
• Designed and tuned in the USA
36.2 lbs (16.46 kg) / 40.96 lbs (18.58 kg)  
800 Watts peak (670 W LF + 130 W HF)
400 Watts continuous (335 W LF + 65 W HF)   
Over-excursion, Thermal, Driver
Transducer Low:
Transducer High:
Power Amplification:
Frequency Range (-10 dB): 
Frequency Response 
(±3 dB)
Maximum SPL 
@ 1 m
-6 dB Nominal Coverage:  
Active Crossover: 
Input  Control: 
External Controls: 
Protection Features:
AC Power: 
Dimensions (HxWxD):
Weight (Net/Shipping): 
(80° / 100° H x 60° V) 
Neodymium compression driver, 1” exit with 1” voice coil
2 x Mic / Line Female XLR - 1/4” combo inputs
1 x Loop - Out Male XLR 
Line / Mic -
 to +50 dB 
Maximum input level +23 dBu, Input Impedance 15 kOhms
Volume, Power switch with LED indicator,  
Clip/Limit LED, Ground Lift switch 
100 VAC,  or 110 – 120 VAC, 
or 220 -  240 VAC  (50 / 60 Hz) 
Trapezoidal, with floor monitor capability. Injection molded 
polypropylene enclosure, with perforated steel grille.
Integrated pole-socket (36 mm dia.) 
Two handles, 5 M10 threaded sockets:  
2 top, 2 bottom, 1 pullback
65 Hz - 19 kHz 
54 Hz - 20 kHz