Gepco VPM2000-0.41 Folheto
High-Definition SDI Coax Distances
Gepco International P. 800.966.0069 P. 847.795.9555 F. 847.795.8770 www.gepco.com
GENERAL CABLE, GEPCO and TACTICEL are trademarks of General Cable Technologies Corporation.
©2012. General Cable Technologies Corporation, Highland Heights, KY 41076. All rights reserved. Printed in USA.
Form No. GEP-0046-1012
©2012. General Cable Technologies Corporation, Highland Heights, KY 41076. All rights reserved. Printed in USA.
Form No. GEP-0046-1012
Maximum values represent the approximate
range at which the bit error rate “cliff
region” will occur.
In every system the quality of the output pulse,
the amount of loss that can be compensated for
by the receiver, the number of passive connectors
and patch points and the exact amount of cable
loss will vary. Because of this, the exact maximum
cable length possible will vary. The graphs to
the right do not represent the exact cable length
possible; they only serve as a guide in selecting the
appropriate cable type. When installing a cable in
a system and it is approaching its maximum range,
it is highly recommended that individual system
testing and research be done.