Nova Florida Seven Super 800/100 SEVEN SUPER 800/100 Folheto
Códigos do produto
SEVEN SUPER 800/100
Se
ven
SUP
eR
11
Super is more powerful than the models in the S4
range.
Super is lighter than the models in the S4 range, and
hence easier to transport and install.
Super has an optimal weight-to-heat output ratio.
Super features numerous exclusive technological
Super features numerous exclusive technological
innovations.
Super has an innovative cap.
Super is a top-of-the-range radiator!
Super is a top-of-the-range radiator!
2011 BRand neW CReatiOn
Super is the new die-cast aluminium radiator by nOvA
FLORIDA that features the following technological
innovations:
FLORIDA that features the following technological
innovations:
Ornamental patent.
Innovative geometry of the 6 rows of side fins that was
developed specially to result in a high heat output with a
smaller surface area and hence less weight.
smaller surface area and hence less weight.
Presence of rear openings allowing enhanced heat
exchange by convection.
A new cap for the element.
eVOlUtiOn: SeVen SUPeR
The new cap is not welded and hydraulic seal is
provided by an O-ring seal.
The new cap is made of aluminized steel.
no welds, so no problems with burrs at the bottom
of the radiator.
all the caps for the models in the Seven Super range
undergo aleternum® anticorrosion treatment.
InnOvATIve
CAP
Fondital guarantees Seven Super for 10 years
from the date of installation against all production
defects providing the heating system is conform
to the regulations, in compliance with the
standards in force and provided the instructions
on installation, use and correct maintenance
supplied with the product have been observed.
Openings on the rear side
new configuration of side fins
for higher heat output
new technical solution: cap
with no welding required
Special c
onfigur
ation of side fins
for enhanc
ed hea
t ex
change
Maximum working pressure: 1600 kPa (16 bar)
Characteristic equation of the model Ф=Кm ΔТn (reference EN 442-1). The thermal
efficiency values, expressed at ΔT 50K, comply with EN 442-2.
Characteristic equation of the model Ф=Кm ΔТn (reference EN 442-1). The thermal
efficiency values, expressed at ΔT 50K, comply with EN 442-2.
0
2
4
6
8
10
0
0,2
0,4
0,6
0,8
1
1,2
1,4
1,6
1,8
2
500/100
350/100
600/100
700/100
800/100
700/100
800/100
Pressure loss Seven Super
Pr
essur
e loss
, mbar
Flow rate, Kg/min
Depth
(C) mm
Height
(B) mm
Centre
distance
(A) mm
Length
(D) mm
Connection
diameters
inches
Water
capacity
litres/sect.
exponent
n
Coefficient
K
m
350/100
97
407
350
80
G1
0.25
1.3096
0.5572
500/100
97
557
500
80
G1
0.32
1.3236
0.7045
600/100
97
657
600
80
G1
0.36
1.3248
0.8071
700/100
97
757
700
80
G1
0.39
1.3308
0.8675
800/100
97
857
800
80
G1
0.43
1.3387
0.9293
Heat output
ΔT 30K
W/sect.
W/sect.
Heat output
Δt 50K
W/sect.
47.9
93.5
63.5
124.9
73.1
143.8
80.2
158.2
88.2
174.8