Philips FWD876 DVD Mini Hi-Fi System FWD876/98 Manual Do Utilizador
Códigos do produto
FWD876/98
10
English
To avoid overheating of the system, a
safety circuit has been built in.
Therefore, your system may switch to
Standby mode automatically under
extreme conditions. If this happens, let
the system cool down before reusing it.
safety circuit has been built in.
Therefore, your system may switch to
Standby mode automatically under
extreme conditions. If this happens, let
the system cool down before reusing it.
Step 2:Connecting Speakers and
Subwoofer
Subwoofer
● Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to “R” and left
speaker to “L”, coloured (marked) wire to “+” and
black (unmarked) wire to “–”. Fully insert the
stripped portion of the speaker wire into the
terminal as shown.
speaker to “L”, coloured (marked) wire to “+” and
black (unmarked) wire to “–”. Fully insert the
stripped portion of the speaker wire into the
terminal as shown.
● Connect the Surround Speakers and Center
Speaker system using the supplied speaker cable
to the speaker jacks on the SUBWOOFER by
matching the colours of the jacks and speaker
plugs.
to the speaker jacks on the SUBWOOFER by
matching the colours of the jacks and speaker
plugs.
● Connect the subwoofer using the supplied
speaker cable to the DIN OUT jack on the DVD
MINI HI-FI System.
MINI HI-FI System.
● Connect the AC MAINS .
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Connections
Step 1: Placing speakers and
subwoofer
subwoofer
For best possible surround sound, all speakers
(except subwoofer) should be placed at the
same distance from the listening position .
(except subwoofer) should be placed at the
same distance from the listening position .
● Retrieve the speaker grilles from the packing
box and fix onto the active speakers as show
below :
● Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening.
approximately 45 degrees from the listening.
● place the center speaker above the TV set, so
the center channel’s sound is localized.
● Place the surround speaker at normal listening
ear level facing each other or mounted on the
set .
set .
● Place the subwoofer on the floor near the TV
set.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
MINI HI-FI System.
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
MINI HI-FI System.
IMPORTANT!
The type plate is located on the rear of
the system.
The type plate is located on the rear of
the system.
Speaker
(right)
Speaker
(left)
AC MAINS
DIN
INPUT
SPEAKERS
110 127V 220 240V
SL
6
C
3
SR
6
er
Right speaker
left speaker
center speaker
retrieve the
speaker grill from
the packing box
speaker grill from
the packing box
fix onto the
active speaker
active speaker
finished-speaker
pg047-pg055_FWD876-Eng-98
2007.12.28, 9:42
10