Symantec Backup Exec System Recovery Windows Small Business Server Edition 11859262 Manual Do Utilizador
Códigos do produto
11859262
You cannot access or see the USB device where your recovery points
are saved
are saved
You must plug in the USB device before you reboot into the recovery environment.
If you did have the device plugged in, you might need to manually assign a drive
letter to the device.
If you did have the device plugged in, you might need to manually assign a drive
letter to the device.
If you still cannot see the USB device, you can manually assign a drive letter to
it.
it.
To assign a drive letter to a USB device in the recovery environment
1
From within the recovery environment, click Analyze.
2
Click Open Command Shell Window.
3
At the command prompt, do the following:
■
Type diskpart, and then press Enter.
■
Type listvol, and then press Enter.
Identify the USB drive in the resulting list.
■
Type select vol
drivenumber
, where
drivenumber
is the number assigned
to the USB drive, and then press Enter.
■
Type assign, and then press Enter.
A warning message indicates that Windows might not run correctly
because of insufficient memory
because of insufficient memory
The recovery environment requires a minimum of 512 MB of RAM to run (768
MB if you have installed the multilingual version of the product). If your computer's
video card is configured to share your computer's RAM, you might need more
than 512 MB of RAM to use the recovery environment.
MB if you have installed the multilingual version of the product). If your computer's
video card is configured to share your computer's RAM, you might need more
than 512 MB of RAM to use the recovery environment.
If you are not sure, you can continue. If you have difficulties using the recovery
environment, you might need to upgrade your computer's memory.
environment, you might need to upgrade your computer's memory.
Your recovery point is on CD, but you cannot use the drive because
the Symantec Recovery Disk CD is running the recovery environment
the Symantec Recovery Disk CD is running the recovery environment
When you restore data from a recovery point that is stored on a CD or DVD from
the recovery environment and you only have one CD or DVD drive, you must leave
the Symantec Recovery Disk CD in that drive until after you have clicked Browse
to locate a recovery point. After the Open dialog box has displayed, remove the
Symantec Recovery Disk CD and insert the media that contains the recovery point.
the recovery environment and you only have one CD or DVD drive, you must leave
the Symantec Recovery Disk CD in that drive until after you have clicked Browse
to locate a recovery point. After the Open dialog box has displayed, remove the
Symantec Recovery Disk CD and insert the media that contains the recovery point.
193
Troubleshooting Backup Exec System Recovery
Troubleshooting the recovery environment