Myfox FO3005 Folheto
KEYPAD WITH BADGE READER
AND NFC SMARTPHONE *
User Guide
1. Overview and features
TAG Technologies S.A.S.
Regent Park II, Bât 1, Rue du Lac
31670 Labège, France
Regent Park II, Bât 1, Rue du Lac
31670 Labège, France
© TAG Technologies. All rights reserved.
EMAIL
:
contact@tag-technologies.com
HOTLINE :
+33 (0)5 61 00 07 11
120705
–
V1
.0
2. Pairing with the central unit
5. Technical specifications
Switch to learning mode on your central unit
Remove the battery protection tab
The keypad activity light will blink orange
The confirmation light will turn green
The central unit and keypad will emit two beeps to
confirm successful pairing
confirm successful pairing
Ref: FO 3005
Max. no. of paired badges: 48
Frequency: Radio 433.92 MHz and RFID 13.56 MHz
Two-way radio function for acknowledging activation and deactivation
Range: 150 m (free field)
Low battery indicator on the central unit
Self-protection system (push-button anti-removal detection mechanism)
Operating temperature: -10
°C to +50°C
Maximum operating altitude: 2,000 m
Protection rating: IP 54 and IK 07
Batteries: 2 x AA LR6
Battery life: 3 years (8 activations per day)
Dimensions: H=120 mm x L=100 mm x D=24 mm
Weight: 137 g (keypad only - batteries not included)
TAG Technologies hereby certifies
that this product complies with the
essential requirements of the R&TTE
Directive 1999/5/CE. A full copy of the
declaration of conformity can be found
at www.myfox.fr/certificats
that this product complies with the
essential requirements of the R&TTE
Directive 1999/5/CE. A full copy of the
declaration of conformity can be found
at www.myfox.fr/certificats
Important
Please sort and dispose of your waste
in
Please sort and dispose of your waste
in
accordance
with
applicable
legislation. All waste should be
disposed of in a suitable location and
in a way that does not harm the
environment.
disposed of in a suitable location and
in a way that does not harm the
environment.
1
Keypad "ON" light
This light indicates that the
keypad is on.
This light indicates that the
keypad is on.
Badge reader area
For authentication, swipe your
badge within 3 cm of the badge
reader area.
For authentication, swipe your
badge within 3 cm of the badge
reader area.
Switch to learning mode on your central unit
Switch to learning mode on your keypad by pressing the full
activation and deactivation buttons simultaneously
activation and deactivation buttons simultaneously
The keypad activity light will blink orange
Swipe your badge over the reader area on the keypad
The keypad activity light will turn green and blink quickly
The confirmation light will turn green
The central unit and keypad will emit a beep to confirm
successful pairing
successful pairing
* In the interest of simplicity, the term "badge" shall refer to both the badge and the NFC smartphone throughout this document
3. Pairing badges
1
2
3
2
3
6
4
5
8
9
Warning: explosion hazard if the
batteries are not replaced with the
correct type. Always dispose of used
batteries appropriately.
batteries are not replaced with the
correct type. Always dispose of used
batteries appropriately.
Confirmation light
This light indicates whether the
command function is active (green
for active, red for inactive).
This light indicates whether the
command function is active (green
for active, red for inactive).
Partial activation button
Works in the same way as the full
activation button.
Works in the same way as the full
activation button.
Self-protection system
The self-protection system is
activated automatically if the keypad
is removed from its wall bracket. An
alert is emitted.
The self-protection system is
activated automatically if the keypad
is removed from its wall bracket. An
alert is emitted.
Wall bracket plate
The keypad must be fixed to the
wall bracket, otherwise the self-
protection system will not work
properly.
The keypad must be fixed to the
wall bracket, otherwise the self-
protection system will not work
properly.
Deactivation button
Works in the same way as the full
activation button.
Works in the same way as the full
activation button.
5
6
8
9
4. Replacing the batteries and fixing to the wall
Batteries: open the
battery compartment with
a screwdriver and insert
the batteries, taking care
to match the poles
correctly.
battery compartment with
a screwdriver and insert
the batteries, taking care
to match the poles
correctly.
Keypad installation: fix the plate to the
wall using screws or double-sided tape.
Slide the keypad onto the plate and
tighten the holding screw at the bottom
of the keypad. The keypad and plate
cannot be used separately.
wall using screws or double-sided tape.
Slide the keypad onto the plate and
tighten the holding screw at the bottom
of the keypad. The keypad and plate
cannot be used separately.
Full activation button
Press the button.
The light will blink slowly.
Swipe your badge across the badge reader area.
The light will blink quickly.
The confirmation light will turn green and will be
permanently lit, and you will hear two beeps from
the keypad, confirming that the central unit has
processed the command.
Press the button.
The light will blink slowly.
Swipe your badge across the badge reader area.
The light will blink quickly.
The confirmation light will turn green and will be
permanently lit, and you will hear two beeps from
the keypad, confirming that the central unit has
processed the command.
Battery protection tab
Remove this tab to power up the
keypad and begin the pairing
process with the central unit.
Remove this tab to power up the
keypad and begin the pairing
process with the central unit.
4
7
7
Internet user interface
IT
ES
GR
PT
NL PL
EN