Philips HTL1170B HTL1170B/F7 Manual Do Utilizador

12 EN

Bluetooth

 • Bluetooth profiles: A2DP, AVRCP

 • Bluetooth version: 2.1 + EDR

Main unit

 • Power supply: 120 V~, 60 Hz

 • Power consumption: 25 W

 • Standby power consumption: ≤ 0.5 W 

•  Speaker impedance: 4 ohm (full range) 

•  Speaker drivers: 4 x 54.5 mm (2")

 • Dimensions (W x H x D): 

865 x 67.8 x 85.5 mm (34.1" x 2.7" x 3.4")

 • Weight: 1.8 kg / 3.96 lbs

Remote control batteries

•  1 x AAA-R03-1.5 V 

7 Troubleshooting

Warning

 

•

Risk of electric shock. Never remove the casing of the 

product.

To keep the warranty valid, never try to repair 

the product yourself. 

If you have problems using this product, check 

the following points before you request service. 

If you still have a problem, get support at 

www.philips.com/support. 

Main unit

The buttons on the SoundBar do not work.

•  Disconnect the SoundBar from the power 

supply for a few minutes, then reconnect.

Sound

No sound from SoundBar speakers.

•  Connect the audio cable from your 

SoundBar to your TV or other devices. 

•  Reset your SoundBar to its factory settings.

•  On the remote control, select the correct 

audio input.

•  Make sure that the SoundBar is not muted. 
Distorted sound or echo.

•  If you play audio from the TV through the 

SoundBar, make sure that the TV is muted.

Bluetooth

A device cannot connect with the SoundBar.

•  The device does not support the 

compatible profiles required for the 

SoundBar.

•  You have not enabled the Bluetooth 

function of the device. See the user manual 

of the device on how to enable the 

function.