Fieldmann FZC 1001-A Manual Do Utilizador

Instructions for proper use

FZC 1001-A

   Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a 

power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention 
while operating power tools may result in serious personal injury.

   To maintain full control of the tool, keep a proper footing at all times with your weight evenly  balanced over 

both feet and never overreach.

   To maintain full control of the tool, keep the handle dry, clean and free from oil and grease. 
   Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-

-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

   Do not force the power tool to do jobs for which it was not intended. The correct power tool will do the job better 

and safer at the rate for which it was designed.

   Do not use the power tool if the power switch is faulty. Any power tool that cannot be controlled with the switch 

is dangerous and must be repaired.

   Power tools are dangerous in the hands of untrained users. When not in use store the tool out of the reach of 

children, and do not allow persons unfamiliar with the tool (or these instructions) to operate it. 

   To prevent the risk of accidents, periodically check the tool for misalignment, binding of moving parts, bre-

akage of parts and any other condition that may affect the operation of the power tool. If the tool is damaged 
in any way, take it to your local hardware store for repair.

   To ensure that the power tool is safe, have it serviced at your local hardware store using only identical repla-

cement parts. .

   Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account 

the working conditions and the work to be performed. Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Battery/Battery charger safety WarnIngs
     To prevent the risk of electric shock, protect the battery charger from rain and moisture. 

   Recharge the battery only with the charger provided. A charger that is suitable for one type of battery pack 

may create a risk of fire when used with another battery pack.

   The supplied battery charger is only suitable for charging the trimming shears and, to prevent the risk of fire 

and explosion must not be used for charging any other tool.

   Before each use, check the battery charger, cable and plug for signs of damage. If the battery charger is da-

maged, do not use it or attempt to repair it. Instead take it to your local hardware store for repair, as damaged 
battery chargers, cables and plugs increase the risk of electric shock.

   To prevent the risk of fire, do not operate the battery charger on flammable surfaces (e.g. paper, textiles, etc.) 

or in combustible environments. 

   If the trimming shears are dropped, or subjected to a hard impact, liquid can be ejected from the battery. 

Should this liquid accidentally contact your skin, immediately flush the area with water as it can cause irritati-
on and even burns. Should the liquid contact your eyes you will also need to seek medical attention.

   To prevent the risk of short circuit, do not open the battery yourself.
   To prevent the risk of explosion, protect the battery from heat, such as continuous sunlight or fire.
   To prevent the risk of explosion, do not short-circuit the battery. 
   If the battery becomes damaged due to improper use, vapour may be emitted. Should this happen get fresh 

air and consult a doctor should any respiratory complaint develop.

FZC 1001-A navodA5.indd   10

9.8.11   18:42