Genelec 8010-202B Manual Do Utilizador
4
www.genelec.com
Table stand Glass base for 6010
Achieving better performance of the 6010 by lifting up the loud-
speaker from the table surface, but also featuring an elegant
outlook, this new Glass Stand has a white stand plate and a glass
chassis
speaker from the table surface, but also featuring an elegant
outlook, this new Glass Stand has a white stand plate and a glass
chassis
8010-205
Table stand with glass base
(K&M 23280-300-00)
8010-408W
Stand plate, white for 6010 Iso-Pod
(K&M 19621-329-57)
Table stand and 6010.
Table stand with white stand plate.
TABLE STAndS
Short table stand
Short table stand providing a raised position for near-field
monitors Suitable for 8020, 8030 and 8040 Heavy black
cast iron base with anti-vibration rubber ring, diameter 17
mm Mounting 3/8" thread on the tube top Preferably used
together with stand plates for better positioning The 8020
and 8030 models have an integrated 3/8" thread for possi-
ble direct fixing without stand plate The 8040 model must
be installed with a stand plate
monitors Suitable for 8020, 8030 and 8040 Heavy black
cast iron base with anti-vibration rubber ring, diameter 17
mm Mounting 3/8" thread on the tube top Preferably used
together with stand plates for better positioning The 8020
and 8030 models have an integrated 3/8" thread for possi-
ble direct fixing without stand plate The 8040 model must
be installed with a stand plate
8000-406
Table stand (K&M 23310-370-55)
8000-406
8000-406 with stand plate.
Speaker fitted on
8000-425B with
stand plate.
8000-425B,
Adjustable
height table
stand
Associated products
8030-408
8020-408
8040-408
8010-408
Adjustable height table stand
Adjustable height table stand for
8020 and 8030 with a base plate
that can be attached to a table or
flat surface Preferably used with
stand plate and IsoPod for better
monitor orientation (see picture
below) The telescopic tube length
(301 to 527 mm) is designed for
optimum monitor positioning
8020 and 8030 with a base plate
that can be attached to a table or
flat surface Preferably used with
stand plate and IsoPod for better
monitor orientation (see picture
below) The telescopic tube length
(301 to 527 mm) is designed for
optimum monitor positioning
behind or above computer screens Screws and fixing nuts
for a 40 mm thick table are included
for a 40 mm thick table are included
8000-425B
Fixed table stand (K&M 23360-300-55)