Behringer SL4220 EUROCOM SL4220 Ficha De Características
Códigos do produto
EUROCOM SL4220
3
Compact, Surface-Mounted 30-Watt, 4" Loudspeaker
SL4220/SL4220-WH
The loudspeaker shall be a professional full-range loudspeaker system in a ported composite enclosure designed for
surface-mounting.
Drivers for the loudspeaker system shall include a 4" / 100 mm low frequency driver and a ¾" / 19 mm high frequency driver.
Enclosure for the loudspeaker system shall be constructed of low-resonance molded composite. The enclosure shall
Drivers for the loudspeaker system shall include a 4" / 100 mm low frequency driver and a ¾" / 19 mm high frequency driver.
Enclosure for the loudspeaker system shall be constructed of low-resonance molded composite. The enclosure shall
be finished with durable, scuff-free black or white paint. The front of the enclosure shall be protected with a detachable
wrap-around steel wire-mesh grille with foam backing. The back of the enclosure shall have a recessed receptacle in which
the connector shall be located.
Mounting bracket shall be supplied with the loudspeaker system. The bracket shall allow aiming in both axes
Mounting bracket shall be supplied with the loudspeaker system. The bracket shall allow aiming in both axes
(90° V by 180° H). The bracket shall mount to an included wall plate.
Electronics incorporated into the loudspeaker system shall include a passive crossover at 2.2 kHz. A rotary switch cap located
Electronics incorporated into the loudspeaker system shall include a passive crossover at 2.2 kHz. A rotary switch cap located
on the front panel shall allow selection between full-range and high-pass modes. The loudspeaker system shall also include a
transformer enabled by a rotary switch cap on the front panel that sets the loudspeaker to operate either in low-impedance
mode (16 Ω) or at one of the supported wattages for high-impedance operation. Transformer taps at 70 V shall be 30, 15,
7.5 and 4 W. Transformer taps at 100 V shall be 30, 15, and 7.5 W.
Connection to the loudspeaker shall be via a 4-pin Euroblock connector on the input plate. The connector shall have two
Connection to the loudspeaker shall be via a 4-pin Euroblock connector on the input plate. The connector shall have two
input terminals and two output “loop-thru” terminals.
Performance criteria met by the loudspeaker system shall include:
• Nominal impedance of 16 Ω
• Sensitivity (1 W / 1 m, half-space) of 86 dB
• Usable frequency range (-10 dB) of 90 Hz-20 kHz
• Frequency response (-3 dB) of 120 Hz-20 kHz
• Power Handling (pink noise) of 30 W RMS
• Maximum SPL (1 m) of 101 dB continuous and 107 dB peak
Physical characteristics of the loudspeaker system shall be:
• Height x Width x Depth of 9.1 x 5.9 x 5.7" / 231 x 150 x 145 mm
• Net weight of not more than 4.4 lbs / 2 kg
The loudspeaker system shall be the BEHRINGER EUROCOM SL4220.
Performance criteria met by the loudspeaker system shall include:
• Nominal impedance of 16 Ω
• Sensitivity (1 W / 1 m, half-space) of 86 dB
• Usable frequency range (-10 dB) of 90 Hz-20 kHz
• Frequency response (-3 dB) of 120 Hz-20 kHz
• Power Handling (pink noise) of 30 W RMS
• Maximum SPL (1 m) of 101 dB continuous and 107 dB peak
Physical characteristics of the loudspeaker system shall be:
• Height x Width x Depth of 9.1 x 5.9 x 5.7" / 231 x 150 x 145 mm
• Net weight of not more than 4.4 lbs / 2 kg
The loudspeaker system shall be the BEHRINGER EUROCOM SL4220.
Architect’s and Engineer’s Specifications