Areca ARC-1225-8I Folheto

Página de 2
ARC-
1215-4x/1225-8x
SAS 2.0 is designed for much higher speed data transfer than previous available and 
backward compatibility with SAS 1.0. The 6Gb/s SAS interface supports both 6Gb/s 
and 3Gb/s SAS/SATA disk drives for data-intensive applications and 6Gb/s or 3Gb/s
SATA drives for low-cost bulk storage of reference data. The ARC-12x5 family only 
support directly attach to 4/8 SAS/SATA drives without supporting the expand 
function.
Highlights
Configurable stripe size up to 
1024KB
Multiple RAID 0 and RAID 10(1E) 
support (RAID 00 and RAID100)
Online capacity expansion, RAID 
level/stripe size migration
Online volume set growth
Redundant flash image for adapter 
availability
Serial bus and SGPIO enclosure 
management
Support EFI BIOS for Mac Pro
SSD automatic monitor clone 
(AMC) support
Controller level hardware encryp-
tion function support
Support for native 4K and 512 
byte sector SAS and SATA 
devices
Support intelligent power manage-
ment to save energy and extend 
service life.
Broad operating support including 
Windows, Linux (open source), 
FreeBSD (open source), Soaris 
(open source), Mac and VMware
Maximum Interoperability
Unparalleled Performance
Unsurpassed Data Availability
The 6Gb/s SAS RAID controllers raise the 
standard to higher performance levels with several 
enhancements including new high performance 
dual core ROC Processor, a DDR3-1333 memory
architecture and high performance PCIe 3.0 x8 
lane host interface bus interconnection. The low 
profile controllers by default support on-board 1G 
of ECC DDR3-1333 SDRAM memory. The optional 
battery backup module provides power to the 
cache if it contains data not yet written to the 
drives when power is lost. The test result is 
against overall performance compared to other 
6Gb/s SAS RAID controllers. The powerful new 
ROC processors integrated 8 6Gb/s SAS ports on 
chip delivers high performance for servers and 
workstations.
As storage capacities continue to rapidly increase, 
users need greater level of disk drive fault 
tolerance, which can be implemented without 
doubling the investment in disk drives. The RAID
6 can offer fault tolerance greater that RAID 1 or 
RAID 5 but only consumes the capacity of 2 disk 
drives for distributed parity data. The 6Gb/s SAS 
RAID controllers with extreme performance RAID
6 engine installed provide the highest RAID 6 
feature to meet this requirement. The controller 
can concurrently compute two parity blocks and 
get very similar RAID 5 performance.
The 6Gb/s SAS RAID controllers can also provide 
RAID levels 0, 1, 1E, 3, 5, 6, 10, 30, 50, 60, Single 
Disk or JBOD for maximum configuration
flexibility. Its high data availability and protection 
derives from the following capabilities: Online 
RAID Capacity Expansion, Array Roaming, Online 
RAID Level / Stripe Size Migration, Global Online 
Spare, Automatic Drive Failure Detection, 
( 4/8-Port PCIe 3.0 External 6Gbps SAS RAID Controllers)  
The 6Gb/s SAS RAID controller support broad 
operating system including Windows 8/Server 
2012(R2)/7/2008/Vista/XP/2003, Linux (Open 
Source), FreeBSD (Open Source), Solaris (Open 
Source), Mac, VMware and more, along with key 
system monitoring features such as enclosure 
management (Serial Bus & SGPIO) and SNMP
function. Our products and technology are based 
on extensive testing and validation process; 
leverage Areca SAS or SATA RAID controller 
field-proven compatibility with operating systems, 
motherboards, applications and device drivers.
Easy RAID Management
The controllers contain an embedded McBIOS 
RAID manager that can access via hot key at M/B 
BIOS boot-up screen. This pre-boot McBIOS RAID 
manager can use to simplify the setup and 
management of RAID controller. The controller 
firmware also contains a browser-based McRAID 
storage manager which can be accessed through 
the Ethernet port or ArcHttp proxy server in 
Windows, Linux, FreeBSD and more environ-
ments. The McRAID storage manager allows local 
and remote to create and modify RAID set, volume
set, and monitor RAID status from standard web 
browser. The Single Admin Portal (SAP) monitor 
utility can support one application to scan multiple 
RAID units in the network.
Automatic Failed Drive Rebuilding, Disk Hot-Swap, 
Online Background Rebuilding, Instant 
Availability/Background Initialization, Auto 
Reassign Sector, Redundant Flash Image and 
Battery Backup Module. Greater than Two TB 
Support allows for very large volume set applica-
tion in 64-bit environment such as data-mining and 
managing large databases.
ARC-1215-4x/1225-8x
( 4/8-Port PCIe 3.0 Internal 6Gbps SAS RAID Controllers)  
ARC-1215-4i/1225-8i