Peerless DCT100 Folheto

T E C H N I C A L   D A T A   S H E E T

Peerless Industries, Inc.  3215 W. North Ave.  Melrose Park, IL 60160
708-865-8870   800-865-2112  Fax 708-865-2941  www.peerlessindustries.com

Unit has stub fitting for attachment of
adjustable length extension column.
Ceiling Mount attaches to round, square,
rectangular, or I-beam. Column attaches
to stub with 2.75" long hex head bolt and
nylock nut.

EXTENSION
COLUMN

STUB

Unit has 1 1/2-11.5 NPT fitting for attachment
of fixed or adjustable length extension
column. Ceiling Mount attaches to round,
square, rectangular, or I-beam.

HORIZONTAL CROSS SUPPORT
(top of Jumbo Mount TV bracket)

EXTENSION
COLUMN

MULTI-DISPLAY MOUNT

(for two to six TV's)

89mm

76mm

*Total weight of components and hardware

76mm

83mm

Protected by U.S. Patent no. 5,127,617. Other U.S. and international patents pending.

The ceiling mount shall be a Peerless model DCT_________ and shall be located where indicated on the plans. It shall
consist of a truss ceiling plate with an integral decoupler assembly to relieve stress (caused by side to side or swaying
action that may result from minor impacts) from damaging TVs/monitors. The truss ceiling mount shall be UL Listed. The
finish shall be Raven Black Fused Epoxy. Installation shall be made in accordance with the instructions provided by the
manufacturer.

2.75" long hex head bolt
is used as a pin to attach
extension column to
stub. Nylock nut
secures the
assembly.

For use with square, round,
rectangular or I-beam trusses.
Maximum dimensions to
accommodate truss ceiling plate
are shown. Truss must be
capable of supporting four
times the load of attached
hardware and components.

Issued: 07-29-99   Sheet No. 142-9502-3   12-01-03

© 2003 Peerless Industries, Inc.  All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.

100 mm

(between holes)

100 mm

(between holes)