Intel SR1640TH SR1640THNA Manual Do Utilizador
Códigos do produto
SR1640THNA
Intel® Server System SR1640TH TPS
Front Panel Control and Indicators
Revision
1.0
Intel order number: E94847-001
78
Table 71. Front LED Indicator Functions
6.2.1
Power / Sleep LED
Table 72. SSI Power LED Operation
Note: Blink rate is approximately 1Hz at 50% duty cycle.
6.2.2
System Status LED
Table 73. System Status LED Operation
Color
State
Criticality
Description
Off
N/A
Not ready
AC power off or BMC initialization completes if no degraded, non-
critical, critical, or non-recoverable conditions exist after AC plug in
critical, critical, or non-recoverable conditions exist after AC plug in
Amber
Solid On
Not ready
Pre DC Power On – 15-20 second BMC Initialization when AC is
applied to the server. The system will not POST until BMC
initialization completes.
applied to the server. The system will not POST until BMC
initialization completes.
Green
Solid on
Ok
System ready
Green
Blink
Degraded
BIOS detected
1. Unable to use all of the installed memory (more than one DIMM
1. Unable to use all of the installed memory (more than one DIMM
installed).
1
2. In a mirrored configuration, when memory mirroring takes place
and system loses memory redundancy. This is not covered by
(2).
(2).
1
State
Power Mode
LED
Description
Power Off
Non-ACPI
Off
System power is off and the BIOS has not initialized the chipset.
Power On
Non-ACPI
Solid On
System power is on but the BIOS has not yet initialized the
chipset.
chipset.
S5
ACPI
Off
Mechanical is off and the operating system has not saved any
context to the hard disk.
context to the hard disk.
S1 Sleep
ACPI
Blink
DC power is still on. The operating system has saved context and
gone into a level of low-power state.
gone into a level of low-power state.
S0
ACPI
Solid On
System and the operating system are up and running.