Intel SR1640TH SR1640THNA Manual Do Utilizador
Códigos do produto
SR1640THNA
Intel® Server System SR1640TH TPS
Environmental and Regulatory Specification
Revision
1.0
Intel order number: E94847-001
84
8. Environmental and Regulatory Specifications
8.1 System Level Environmental Limits
The following table defines the system level operating and non-operating environmental
limits.
limits.
Table 78. System Office Environmental Summary
Parameter
Limits
Operating Temperature
+10
C to +35 C with the maximum rate of change not to exceed 10 C per
hour
Non-Operating
Temperature
Temperature
-40
C to +70 C
Non-Operating Humidity
50%- 90%, non-condensing with a maximum wet bulb of 28
C
Acoustic noise
Sound Pressure: 55 dBA (Rackmount) in an idle state at typical office
ambient temperature. (23
ambient temperature. (23
C +/- 2 C) Sound Power: 7.0 BA in an idle state at
typical office ambient temperature. (23 +/- 2 degrees C)
Shock, operating
Half sine, 2 g peak, 11 mSec
Shock, unpackaged
Trapezoidal, 25 g, velocity change 136 inches/sec ( 40 lbs to > 80 lbs)
Shock, packaged
Non-palletized free fall in height 24 inches ( 40 lbs to > 80 lbs)
Vibration, unpackaged
5 Hz to 500 Hz, 2.20 g RMS random
Shock, operating
Half sine, 2 g peak, 11 mSec
ESD
+/-15kV except I/O port +/-8KV per Intel
®
Environmental test specification
System Cooling
Requirement in BTU/Hr
Requirement in BTU/Hr
2050 BTU/hour
EMI operating
Required to meet EMI emission requirements, tested as part of system
8.2 Serviceability and Availability
The system is designed to be serviced by qualified technical personnel only.
The desired Mean Time To Repair (MTTR) the system is 15 minutes, which includes
diagnosing the system’s problem. To meet this goal, the system enclosure and hardware
was designed to minimize the MTTR.
diagnosing the system’s problem. To meet this goal, the system enclosure and hardware
was designed to minimize the MTTR.
The following are the maximum times a trained field service technician should take to
perform the listed system maintenance procedures after diagnosing the system and
identifying the failed component(s).
perform the listed system maintenance procedures after diagnosing the system and
identifying the failed component(s).
Activity
Time Estimate
Plug out the tray
10 sec
Remove and replace hard disk drive
1 min
Remove and replace power supply module
30 sec
Remove and replace system fan(each)
1 min
Remove and replace server board(include cable routing)
10 min
8.3 Replacing the Back up Battery
The lithium battery on the server board powers the real time clock (RTC) for up to 10 years
in the absence of power. When the battery starts to weaken, it loses voltage, and the server
settings stored in CMOS RAM in the RTC (for example, the date and time) may be wrong.
Contact your customer service representative or dealer for a list of approved devices.
in the absence of power. When the battery starts to weaken, it loses voltage, and the server
settings stored in CMOS RAM in the RTC (for example, the date and time) may be wrong.
Contact your customer service representative or dealer for a list of approved devices.