Gigaset DX800A S30853-H3100-D201 Manual Do Utilizador

Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / settings.fm / 18.04.11

V

e

rsion 4, 16.0

9

.2005

You can connect your base to the Internet 
(DSL connection) to make calls via VoIP and, 
in addition, to a default telephone connec-
tion – the ISDN or analogue fixed line. Your 
telephone automatically detects the net-
work to which it is connected and changes 
its configuration accordingly. 

If you change the phone connection from 
ISDN to the fixed line or vice versa, the fol-
lowing message is displayed:

¤

Press the display key 

 to start network 

identification. 

Once the network has been identified, the 
following appears in the display:

Or:

¤

If the network has been identified cor-
rectly, press the display key 

. 

If you wish to repeat the network identifica-
tion procedure, press the display key 

 

instead. 

Once you have confirmed the offered tele-
phone connection with 

, any system set-

tings on the phone relating to the connec-
tion must be reset first so that the phone's 
configuration can be adjusted to the 
changed connection.

The following is displayed:

¤

Press the display key 

 to start the 

reset. 

All necessary system settings are reset. 
IP and VoIP settings, for example, are 
retained and the handsets are still regis-
tered. 

If there were no VoIP connections config-
ured on the base before the change of con-
nection, after the reset the installation wiz-
ard is started for the current connection (see 
the following table). 

For the connection wizard procedure see 

ff. 

Connect the phone to the telephone 
connection first and only afterwards to 
the power supply.

Network Detection

Ð

OK

 ISDN and VoIP ISDN wizard 

IP wizard

Registration wizard

Connection wizard

Fixed line and 
VoIP

IP wizard

Registration wizard

Connection wizard

Network Detection

Ð

No

Yes