Altronix eFlow3N EFLOW3N Folheto
Códigos do produto
EFLOW3N
Input:
• 120VAC, 60Hz, 3.5 amp.
• Input fuse: 5A/250V.
• Input fuse: 5A/250V.
Output:
• 12VDC or 24VDC selectable output.
• 12VDC or 24VDC @ 2.0 amp supply current.
• Power-limited output.
• Auxiliary Power-Limited output
rated @ 1 amp (unswitched).
• Over Voltage Protection.
• 12VDC or 24VDC @ 2.0 amp supply current.
• Power-limited output.
• Auxiliary Power-Limited output
rated @ 1 amp (unswitched).
• Over Voltage Protection.
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Maximum charge current 1.54 amp.
• Automatic switch over to stand-by battery when
AC fails. Transfer to stand-by battery power is
instantaneous with no interruption.
• Maximum charge current 1.54 amp.
• Automatic switch over to stand-by battery when
AC fails. Transfer to stand-by battery power is
instantaneous with no interruption.
Supervision:
• AC fail supervision (form “C” contacts).
• Battery fail & presence supervision
(form “C” contacts).
• Low power shutdown. Shuts down DC output terminals
if battery voltage drops below 71-73% for 12V units
and 70-75% for 24V units (depending on the power
supply). Prevents deep battery discharge.
• Battery fail & presence supervision
(form “C” contacts).
• Low power shutdown. Shuts down DC output terminals
if battery voltage drops below 71-73% for 12V units
and 70-75% for 24V units (depending on the power
supply). Prevents deep battery discharge.
Fire Alarm Disconnect:
• Supervised Fire Alarm disconnect (latching or
non-latching) 10K EOL resistor. Operates on a
normally open (NO) or normally closed (NC) trigger.
non-latching) 10K EOL resistor. Operates on a
normally open (NO) or normally closed (NC) trigger.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.:
12VDC: 12.28 BTU/Hr.
24VDC: 24.57 BTU/Hr.
• System AC input VA requirement: 420VA.
• BTU/Hr.:
12VDC: 12.28 BTU/Hr.
24VDC: 24.57 BTU/Hr.
• System AC input VA requirement: 420VA.
Visual Indicators:
• Green AC Power LED indicates 120VAC present.
• AC input, DC output and Battery LED indicators.
• AC input, DC output and Battery LED indicators.
Additional Features:
• Short circuit and overload protection.
• Unit is complete with power supply, enclosure,
battery leads and cam lock.
• Unit is complete with power supply, enclosure,
battery leads and cam lock.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
13.5” (342.9mm) x 13” (330.2mm) x 3.25” (82.55mm)
- Accommodates up to two (2)12VDC/7AH batteries.
• Product weight (approx.): 8.5 lbs. (3.86 kg).
• Shipping weight (approx.): 9.4 lbs. (4.26 kg).
13.5” (342.9mm) x 13” (330.2mm) x 3.25” (82.55mm)
- Accommodates up to two (2)12VDC/7AH batteries.
• Product weight (approx.): 8.5 lbs. (3.86 kg).
• Shipping weight (approx.): 9.4 lbs. (4.26 kg).
Specifications
eFlow3N is a power supply/charger that converts a 120VAC, 60Hz input into a
single 12VDC or 24VDC Class 2 Rated power-limited output.
single 12VDC or 24VDC Class 2 Rated power-limited output.
eFlow3N
Power Supply/Charger
Rev. DSeFlow3N_01042013
Overview
Agency Approvals
UL 294
UL Listed for Access Control
System Units.
UL 603
UL Listed for Power Supplies
for Use with Burglar-Alarms
Systems.
UL 1481 UL Listed for Power Supplies
for Fire Protective Signaling
Systems.
eFlow3N
ULC-S318-96 - Power Supplies for
Burglar Alarm Systems. Also suitable for
Access Control.
CSFM - California State Fire
Marshal Approved.
Altronix Corp.
140 58th St. Brooklyn, NY