Voltcraft USB charger Mains socket SPS5-5W USB USB 1 x 1000 mA SPS5-5W USB Folheto

Códigos do produto
SPS5-5W USB
Página de 2
 OPERATING INSTRUCTIONS
Version 05/10
SPS5-5W USB MOBILE ADAPTOR
Item No.  51 26 63
INTENDED USE
1. 
This  product  is  designed  for  charging  mobiles  or  portable  devices. This  set  includes  8  types  of  connector 
for different devices. It can also be used to charge a device directly via the USB port or to operate a USB 
product such as a USB lamp. This product is powered by 100 - 240 V/AC, 50/60 Hz. Use only in dry indoor 
environment.
This product fulfils European and national requirements related to electromagnetic compatibility (EMC). 
CE conformity has been verified and the relevant statements and documents have been deposited at 
the manufacturer.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval 
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to 
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly 
and keep them for further reference.
DELIVERy CONTENT
2. 
Adaptor
• 
USB power cord
• 
Connector x 8
• 
Operating instructions
• 
SAFETy INSTRUCTIONS
3. 
We  do  not  assume  liability  for  resulting  damages  to  property  or  personal  injury  if  the 
product has been abused in any way or damaged by improper use or failure to observe 
these operating instructions. The warranty/ guarantee will then expire!
The  icon  with  exclamation  mark  indicates  important  information  in  the  operating 
instructions. Carefully read the whole operating instructions before operating the device, 
otherwise there is risk of danger.
Persons / Product
The product is not a toy and should be kept out of reach of children!
• 
The  device  generates  heat  during  operation.  Ensure  adequate  housing  and  do  not  cover  the  housing 
• 
during operation.
When used in conjunction with other devices, observe the operating instructions and safety notices of  
• 
connected devices.
The product must not be subjected to heavy mechanical stress.
• 
The  product  must  not  be  exposed  it  to  extreme  temperatures,  direct  sunlight,  intense  vibration,  or 
• 
dampness.
If there is reason to believe that safe operation is no longer possible, the device is to be put out of operation 
• 
and secured against unintended operation. Safe operation is no longer possible if the device:
shows visible damages,
 -
no longer works,
 -
was stored under unfavourable conditions for a long period of time or
 -
was subject to considerable transport stress
 -
Miscellaneous
Repair works must only be carried out by a specialist/ specialist workshop.
• 
If you have queries about handling the device, that are not answered in this operating instruction, our 
• 
technical  support  is  available  under  the  following  address  and  telephone  number:  Voltcraft
®
,  92242 
Hirschau, Lindenweg 15, Germany, phone 0180 / 586 582 7.
OPERATION
4. 
Always turn off the electrical load before pluging/unpluging the load to the adaptor. Ensure 
connection is proper. If the adaptor is connected improperly, it may heat up or may cause 
electric shocks, fire, etc.
Connect the USB power cord to the adaptor.
1. 
You may charge / power your electronic device directly via the USB port. Plug the USB cable 
directly into the adaptor in order to do so. The load should not consume more than 1 A.
Select the desired connector.
2. 
Plug the selected connector into the USB power cord while observing the correct polarity. The positive pin 
3. 
and the negative pin is in different size.
Plug the mains-plug power cord into a mains outlet of 100 - 240 V/AC, 50-60 Hz.
4. 
Connect the device to the adaptor. 
5. 
Check your device for the charging status. Disconnect your device when charging is completed. 
6. 
LED INDICATION
5. 
The green LED light on the adaptor indicates that power is connected.
REFERENCE
6. 
ø 3.5 mm
For Nokia:
E70,  E60,  9500,  9300i, 
7610, 7380, 7360, 7280, 
7270, 6820, 6680, 6260, 
6230i,  6170,  6100, 
6060, 6012, 3230, 1112, 
1110, 1100, N-Gage QD
For Motorola:
V3
ø 2 mm
For Nokia:
N93,  N93i,  NB91,  N90, 
N80,  N73,  N72,  N71, 
N70,  E61,  E50,  7370, 
7360,  6280,  6270, 
6233, 6131, 6125, 6111, 
6103, 6101, 6085, 6070, 
5500, 3250
For Motorola:
V66, V120
For Sony Ericson:
J100i,  J230i,  K550i, 
K610i,  K750i,  K800i, 
M600i,  W200i,  W300i, 
W550i,  W700i,  W710i, 
W800i,  W850i,  W880i, 
W900i,  Z310i,  Z710i, 
Z610i, Z550i, Z558i
For LG:
KG800, LS20
For Samsung:
D528,  D808,  D838, 
D848,  E258,  E428, 
E898,  E908,  i718, 
P308,  X828,  X838, 
Z368, Z548, Z728
ø 4 mm (yellow)
For  PSP,  TomTom 
navigation systems
CLEANING
7. 
Wipe the housing of the product with a slightly damp cloth. Only use water to moisten the cloth. Do not use 
chemicals or cleaning agents when cleaning.
DISPOSAL
8. 
In order to preserve, protect and improve the quality of environment, protect human health and 
utilise natural resources prudently and rationally, the user should return unserviceable product to 
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as 
municipal waste.
TECHNICAL DATA
9. 
Input voltage:
100 - 240 V/AC, 50/60 Hz
Output voltage:
5 V/DC ± 10 %
Output current:
1 A max.
Operating temperature:
0 to +35 ºC
Operating humidity:
10 % to 85 %
Storage temperature:
-10 to +55 ºC
Storage humidity:
5 % to 95 %
Cable length:
1 m
Dimensions (W x H x D):
69 x 48 x 42 mm
Weight:
59 g
 BEDIENUNGSANLEITUNG
Version 05/10
SPS5-5W USB HANDy-NETZTEIL
Best.-Nr.  51 26 63
BESTIMMUNGSGEMÄSSE VERWENDUNG
1. 
Dieses Produkt dient zum Aufladen von Handys und anderen tragbaren Geräten. Das Set enthält 8 Anschlusstypen für 
unterschiedliche Geräte. Es kann auch zum direkten Aufladen eines Geräts benutzt werden, über die USB-Schnittstelle, 
oder zum Betrieb eines USB-Produkts wie zum Beispiel einer USB-Lampe. Die Stromversorgung des Produkts erfolgt 
über 100 - 240 V/AC, 50/60 Hz Netzstrom. Ausschließlich in trockenen InnenrÄumen zu verwenden.
Das Produkt ist EMV-geprüft und erfüllt die Anforderungen der geltenden europäischen und nationalen 
Richtlinien.  Die  CE-Konformität  wurde  nachgewiesen,  die  entsprechenden  Erklärungen  sind  beim 
Hersteller hinterlegt.
Aus Sicherheits- und Zulassungsgründen (CE) ist das eigenmächtige Umbauen und/oder Verändern des Produktes 
nicht gestattet. Eine andere Verwendung als oben beschrieben ist nicht erlaubt und kann zur Beschädigung des 
Produkts führen. Darüber hinaus ist dies mit Gefahren, wie z. B. Kurzschluss, Brand, Stromschlag usw. verbunden. 
Lesen Sie die Bedienungsanleitung genau durch und bewahren Sie diese für späteres Nachschlagen auf.
LIEFERUMFANG
2. 
Adapter
• 
USB-Netzkabel
• 
Anschlussstück 8 x
• 
Bedienungsanleitung
• 
SICHERHEITSHINWEISE
3. 
Bei  Schäden,  die  durch  Nichtbeachten  dieser  Bedienungsanleitung  verursacht  werden, 
erlischt die Gewährleistung/Garantie! Für Folgeschäden übernehmen wir keine Haftung!
Bei  Sach-  oder  Personenschäden,  die  durch  unsachgemäße  Handhabung  oder 
Nichtbeachten der Sicherheitshinweis verursacht werden, übernehmen wir keine Haftung. 
In solchen Fällen erlischt die Gewährleistung/Garantie.
Wichtige Hinweise, die unbedingt zu beachten sind, werden in dieser Bedienungsanleitung 
durch das Ausrufezeichen gekennzeichnet.
Personen / Produkt
Das Produkt ist kein Spielzeug und sollte von Kindern ferngehalten werden!
• 
Das Gerät erzeugt im Betrieb Hitze. Achten Sie auf ausreichende Belüftung und decken Sie das Gerät 
• 
während des Betriebs nicht ab.
Beachten Sie auch die Sicherheitshinweise und Bedienungsanleitungen der übrigen Geräte, die an das 
• 
Gerät angeschlossen werden.
Das Produkt darf keinem starken mechanischen Druck ausgesetzt werden.
• 
Das  Produkt  darf  keinen  extremen  Temperaturen,  direktem  Sonnenlicht,  starken  Vibrationen  oder 
• 
Feuchtigkeit ausgesetzt sein.
Wenn kein sicherer Betrieb mehr möglich ist, nehmen Sie das Gerät außer Betrieb, und schützen Sie es 
• 
vor unbeabsichtigter Verwendung. Der sichere Betrieb ist nicht mehr gewährleistet, wenn das Gerät:
sichtbare Schäden aufweist,
 -
nicht mehr ordnungsgemäß funktioniert,
 -
über einen längeren Zeitraum unter ungünstigen Umgebungsbedingungen gelagert wurde oder
 -
erheblichen Transportbelastungen ausgesetzt wurde.
 -
Sonstiges
Eine Reparatur des Geräts darf nur durch eine Fachkraft bzw. einer Fachwerkstatt erfolgen.
• 
Sollten Sie noch Fragen zum Umgang mit dem Gerät haben, die in dieser Bedienungsanleitung nicht beantwortet 
• 
werden, steht Ihnen unser Technischer Support unter folgender Anschrift und Telefonnummer zur Verfügung:
Voltcraft
®
, 92242 Hirschau, Lindenweg 15, Deutschland, Tel.: 0180 / 586 582 7.
BEDIENUNG
4. 
Schalten Sie immer die anzuschließende elektrische Last aus, bevor Sie diese mit den 
USB-Anschlüssen verbinden. Achten Sie auf eine korrekte Verbindung. Sollte der Adapter 
nicht  korrekt  angeschlossen  sein,  kann  er  sich  aufheizen,  einen  elektrischen  Schlag, 
Feuer erzeugen usw.
Verbinden Sie das USB-Netzkabel mit dem Adapter.
1. 
Sie können Ihr elektrisches Gerät über die USB-Schnittstelle aufladen bzw. betreiben. Schließen 
Sie dazu das USB-Kabel direkt am Adapter an. Der Verbraucher sollte dabei nicht mehr als 1 A 
Strom aufnehmen.
Wählen Sie das gewünschte Anschlussstück aus.
2. 
Stecken Sie das ausgewählte Anschlussstück am USB--Netzkabel ein und beachten Sie dabei die korrekte 
3. 
Polarität. Plus- und Minuspol haben unterschiedliche Gräßen.
Verbinden Sie das Netzkabel mit dem Netzstecker in eine 100 - 240 V/AC, 50-60 Hz Netzsteckdose.
4. 
Schließen Sie das Gerät am Adapter an. 
5. 
Überprüfen Sie den Ladestatus Ihres Gerätes. Trennen Sie Ihr Gerät nach dem vollständigen Aufladen vom Adapter. 
6. 
LED-ANZEIGEN
5. 
Das grüne LED-Licht am Adapter zeigt an, dass Stromversorgung besteht.
HINWEIS
6. 
ø 3.5 mm
Für Nokia:
E70,  E60,  9500,  9300i, 
7610, 7380, 7360, 7280, 
7270, 6820, 6680, 6260, 
6230i,  6170,  6100, 
6060, 6012, 3230, 1112, 
1110, 1100, N-Gage QD
Für Motorola:
V3
ø 2 mm
Für Nokia:
N93,  N93i,  NB91,  N90, 
N80,  N73,  N72,  N71, 
N70,  E61,  E50,  7370, 
7360,  6280,  6270, 
6233, 6131, 6125, 6111, 
6103, 6101, 6085, 6070, 
5500, 3250
Für Motorola:
V66, V120
Für Sony Ericson:
J100i,  J230i,  K550i, 
K610i,  K750i,  K800i, 
M600i,  W200i,  W300i, 
W550i,  W700i,  W710i, 
W800i,  W850i,  W880i, 
W900i,  Z310i,  Z710i, 
Z610i, Z550i, Z558i
For LG:
KG800, LS20
Für Samsung:
D528,  D808,  D838, 
D848,  E258,  E428, 
E898,  E908,  i718, 
P308,  X828,  X838, 
Z368, Z548, Z728
ø 4 mm (gelb)
Für  PSP,  TomTom 
Navigationssysteme
REINIGUNG
7. 
Wischen Sie das Gehäuse des Produkt mit einem leicht feuchten Tuch ab. Benutzen Sie nur Wasser zum 
Anfeuchten des Tuchs. Verwenden Sie keine Chemikalien oder Reinigungsmittel zum Reinigen.
ENTSORGUNG
8. 
Im  Interesse  unserer  Umwelt  und  um  die  verwendeten  Rohstoffe  möglichst  vollständig  zu 
recyclen, ist der Verbraucher aufgefordert, gebrauchte und defekte Geräte zu den öffentlichen 
Sammelstellen für Elektroschrott zu bringen.
Das  Zeichen  der  durchgestrichenen  Mülltonne  mit  Rädern  bedeutet,  dass  dieses  Produkt  an 
einer Sammelstelle für Elektronikschrott abgegeben werden muss, um es durch Recycling einer 
bestmöglichen Rohstoffwiederverwertung zuzuführen.
TECHNISCHE DATEN
9. 
Eingangsspannung:
100 - 240 V/AC, 50/60 Hz
Ausgangsspannung:
5 V/DC ± 10 %
Ausgangsstrom:
1 A max.
Betriebtemperatur:
0 bis +35 ºC
Betriebluftfeuchtigkeit:
10 % bis 85 %
Lagertemperatur:
-10 bis +55 ºC
Lagerluftfeuchtigkeit:
5 % bis 95 %
Kabellänge:
1 m
Abmessungen (B x H x T):
69 x 48 x 42 mm
Gewicht:
59 g
Diese Bedienungsanleitung ist eine Publikation von Voltcraft®,
Lindenweg 15, D-92242 Hirschau, Tel.-Nr. 0180/ 586 582 7.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, 
Mikroverfilmung, oder die Erfassung in elektronischen Datenverarbeitungsanlagen, bedürfen der 
schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung.
Änderung in Technik und Ausstattung vorbehalten.
© Copyright 2010 by Voltcraft
®
.
*02_05/10_01-HL
These operating instructions are published by Voltcraft®, 
Lindenweg 15, D-92242 Hirschau/ Germany, Phone +49 180 586 582 7.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the 
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, 
also in part, is prohibited. 
The operating instructions reflect the current technical specifications at time of print. 
We reserve the right to change the technical or physical specifications.
© Copyright 2010 by Voltcraft®.
*02_05/10_01-HL