TE Connectivity Round connector for DIN 72585 3 - to 7-pin, pin and socket Plug housing 1-968968-3 1-968968-3 Guia De Informação
Códigos do produto
1-968968-3
Introduction
Circular Contact Systems
Diameter 1.5 mm and 2.5 mm Contact System
Section Catalog 1654286-2
.
Revised 4-2010
.
Main Catalog 1654400-1
Chapter 26 – Issued 4-2010
.
All specifications subject to change. Consult TE Connectivity for latest specifications.
26-3
The diameter 1.5 mm and dia-
meter 2.5 mm round contact
systems developed by TE
Connectivity is mainly used in
the automotive industry. Due
to its wide range of perform-
ance possibilities, this contact
system is in use in the engine
compartment for aggregate or
sensor connections.
meter 2.5 mm round contact
systems developed by TE
Connectivity is mainly used in
the automotive industry. Due
to its wide range of perform-
ance possibilities, this contact
system is in use in the engine
compartment for aggregate or
sensor connections.
Every contact has got a steel
cantilever spring and a copper
alloy body.
cantilever spring and a copper
alloy body.
The two-piece contact design
means that the electrical and
mechanical properties are
separated. One end of the
contact body is crimped to
wire and the other end mates
with the matching pin.
means that the electrical and
mechanical properties are
separated. One end of the
contact body is crimped to
wire and the other end mates
with the matching pin.
The closed cantilever spring
has got several functions and
also different advantages for
the complete contact system.
has got several functions and
also different advantages for
the complete contact system.
In addition there are several
lances on the steel to spring.
These serve to look the con-
tact securely in the housing.
lances on the steel to spring.
These serve to look the con-
tact securely in the housing.
Sockets and pins can be
applied on both sealed and
unsealed connectors.
applied on both sealed and
unsealed connectors.
The diameter 1.5 mm and dia-
meter 2.5 mm contact system
can be fast and economically
arranged to the lead using
TE Connectivity application
tooling.
meter 2.5 mm contact system
can be fast and economically
arranged to the lead using
TE Connectivity application
tooling.
Technical Features
■
100 % quality assurance for
the contact socket
the contact socket
■
Resistant against fretting
corrosion
corrosion
■
Vibration resistant
■
Excellent longevity
■
Low contact resistance
■
High position configurations
■
Contact design accepts
secondary locking device
secondary locking device
■
Several contact points
■
Sturdy contact design
■
Guarantees constant
insertion and extraction
forces
insertion and extraction
forces