TP-LINK AV500 TL-WPA4230P KIT Manual Do Utilizador
Códigos do produto
TL-WPA4230P KIT
TL-WPA4230P
AV500 Passthrough Powerline WiFi Extender
18
Key Type - You can select the WEP key length (64-bit, or 128-bit) for encryption. "Disabled"
means this WEP key entry is invalid.
means this WEP key entry is invalid.
For
64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f,
A-F, zero key is not permitted) or 5 ASCII characters.
For
128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f,
A-F, zero key is not permitted) or 13 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have selected Shared
Key as Authentication Type.
Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.
3.4.3 Wireless MAC Filtering
Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to control
wireless stations accessing the device, which depends on the station’s MAC address on the following
screen as shown in Figure 3-14.
wireless stations accessing the device, which depends on the station’s MAC address on the following
screen as shown in Figure 3-14.
Figure 3-14 Wireless MAC Filtering
Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering.
The default setting is disabled.
The default setting is disabled.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The “Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 3-15.
Wireless MAC Address Filtering entry" page will appear, shown in Figure 3-15.
Figure 3-15 Add or Modify Wireless MAC Address Filtering entry