Digisender Powerline 4 pc kit 200 Mbit/s DGHDP1-EU Ficha De Dados
Códigos do produto
DGHDP1-EU
Page 07
Please read the instructions carefully prior to installation
DGHDP1 - DigiSender® HD Pro - 1080p Powerline AV Sender System
Installing your DigiSender®
Step 3 - Install the IR Emitter
The DigiSender® HD Pro features a remote relay system that allows you to control your source device (e.g. HD
Satellite receiver, from the second TV. The DigiSender® Receiver is fitted with an IR Sensor that will pick up the
IR signal from your source remote control (e.g. HD Satellite remote control). This IR signal is sent over your mains
power line to the DigiSender® Transmitter, where it is then sent to the source device (e.g. HD Satellite receiver)
via the IR Emitter.
Position 1: Place the IR Emitter facing the remote
control sensor on the front of your source device
(e.g. HD Satellite receiver) .
Position 2: Use the included sticky pad to stick the
IR emitter to the front of your source device, near
to, and facing, the remote control sensor.
The IR Emitter can be mounted in one of two different positions and it is best to try both positions to ensure
optimal performance.