Rigol MSO1074Z-S 4-channel oscilloscope, Digital Storage oscilloscope, MSO1074Z-S Manual Do Utilizador
Códigos do produto
MSO1074Z-S
RIGOL
DS1000Z Quick Guide
4
Power-on Inspection
When the oscilloscope is energized, press the power key
at
the lower-left corner of the front panel to turn on the oscilloscope.
During the start-up process, the oscilloscope performs a series of
self-test items. After the self-test is finished, the welcome screen is
displayed and if your instrument has been installed a trial version
of the option, you can view the Option Type, Option name, Option
Edition and Left time of the option currently installed in the
“Installed Options” pop-up dialog box on the screen. When the
instrument is shipped, a trial version of the option is provided and
the left time is about 2000 minutes.
During the start-up process, the oscilloscope performs a series of
self-test items. After the self-test is finished, the welcome screen is
displayed and if your instrument has been installed a trial version
of the option, you can view the Option Type, Option name, Option
Edition and Left time of the option currently installed in the
“Installed Options” pop-up dialog box on the screen. When the
instrument is shipped, a trial version of the option is provided and
the left time is about 2000 minutes.
To Connect the Probe
RIGOL provides passive probes for the DS1000Z series
oscilloscopes. For detailed technical information of the probes,
please refer to corresponding Probe User’s Guide. The following
are the probes recommended for use with this oscilloscope.
Model
Description
RP2200
150 MHz, passive probe, standard
Connect the Probe:
1. Connect the BNC terminal of the probe to a channel BNC
connector of the oscilloscope at the front panel.
2. First, connect the ground alligator clip of the probe to the
circuit ground terminal, and then connect the probe tip to the