Rigol DS2202A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A-S Manual Do Utilizador
Códigos do produto
DS2202A-S
RIGOL
DS2000A User’s Guide
6-3
Press Invert to turn the inverted display of the operation results on or off.
HORIZONTAL
HORIZONTAL
POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Multiplication
Multiply the waveform voltage values of signal source A and B point by point and
display the results.
Press MATH Operate to select “A x B”:
Press Source A and Source B to select the desired channels (CH1 or CH2).
display the results.
Press MATH Operate to select “A x B”:
Press Source A and Source B to select the desired channels (CH1 or CH2).
Press
and use
to adjust the vertical position of the operation results.
Press
and use
to adjust the vertical scale of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
HORIZONTAL
HORIZONTAL
POSITION and HORIZONTAL
SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Division
Divide the waveform voltage values of signal source A by that of source B point by
point and display the results. It can be used to analyze the multiple relationships of
waveforms in the two channels. Note that when the voltage value of channel B is 0,
the result of the division is treated as 0.
Press MATH Operate to select “A ÷ B”:
Press Source A and Source B to select the desired channels (CH1 or CH2).
point and display the results. It can be used to analyze the multiple relationships of
waveforms in the two channels. Note that when the voltage value of channel B is 0,
the result of the division is treated as 0.
Press MATH Operate to select “A ÷ B”:
Press Source A and Source B to select the desired channels (CH1 or CH2).
Press
and use
to adjust the vertical position of the operation results.
Press
and use
to adjust the vertical scale of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
HORIZONTAL
HORIZONTAL
POSITION and HORIZONTAL
SCALE can also be
used to adjust the horizontal position and scale of the operation results.