Lecroy WaveStation 2022 Function Generator, Frequency Generator WaveStation 2022 Manual Do Utilizador

Códigos do produto

WaveStation 2022

WaveStation SCPI Command Reference Manual

920595 RevA

CARR, MEAN

<mean>

Only applicable when the carrier waveform is set to Noise, this parameter sets
the mean.

Note: Tables specifically covering command arguments are listed in the order in which they are functionally
processed for convenience.

Where:

<state>:= {ON,OFF}

<period>:= {The default unit is in “S”. 1µs to 500s}

<start phase>:= {0 to 360}

<gate ncycle>:= {GATE,NCYC}

<trigger>:= {EXT,INT,MAN}

<delay>:= {The default unit is in “S”. 0s to 500s}

<polarity>:= {NEG,POS}

<trig mode>:= {RISE,FALL,OFF}

<edge>:= {RISE,FALL}

<cycle time> := {1 to 50000 cycles}

<wave type>:= {SINE,SQUARE,RAMP,PULSE,NOISE,ARB}

<frequency>:= {The default unit is in “HZ”. The minimum value is 1xe-6 HZ and
the maximum depends on the WaveStation model.}

<amplifier>:= {The default unit is in “V”. The C1 minimum value is 0.004V,
maximum is 6V. The C2 minimum value is 0.004V and the maximum is 20V.}

<offset>:= {The default unit is in “V”. The maximum value depends onyou’re
your WaveStation model.}

<duty>:= {If the waveform type is set to Square, the range is from 20% to 80%. If
the waveform type is set to Pulse, the range is from 0.1% to 99.9%}

<symmetry>:= {0% to 100%}

<carr delay>:= {The maximum delay is the Pulse period, and the minimum value
is 0. Units are in S.}

QUERY

SYNTAX

<channel>: BursTWaVe?

RESPONSE

FORMAT

<channel>: BursTWaVe <type>,<state>,<period>

EXAMPLE

Set the C1 Burst waveform period to 1S.

C1: BTWV PRD, 1S

EXAMPLE

Set the C1 Burst waveform delay to 0S.

C1: BTWV DLAY, 0S