Fluke VDE-tester 4425913 Manual Do Utilizador
Códigos do produto
4425913
Electrical
Installation
Tester
Making
Measurements
19
Making Measurements
Measuring Volts and Frequency
apx002f.eps
Figure 8. Volts Display/Switch and Terminal Settings
To measure voltage and frequency:
1. Turn the rotary switch to the V position.
2. Use all (red, blue, and green) terminals for this test. You can use test leads
2. Use all (red, blue, and green) terminals for this test. You can use test leads
or mains cord when measuring AC voltage.
•
The primary (upper) display shows the AC voltage. The tester reads
AC voltage to 500 V. Press to toggle the voltage reading between
L-PE, L-N, and N-PE.
AC voltage to 500 V. Press to toggle the voltage reading between
L-PE, L-N, and N-PE.
•
The secondary (lower) display shows mains frequency.