Fluke VDE-tester 4425913 Manual Do Utilizador
Códigos do produto
4425913
1652C/1653B/1654B
Users Manual
Users Manual
38
2. To enable the data subset number to be changed, press . The data
subset number will now be flashing. To enable the data sub number to be
changed, press again. The data set number will now be flashing. Press
again to change the data id number.
changed, press again. The data set number will now be flashing. Press
again to change the data id number.
3. Press the down arrow key () to decrement the enabled number or press
the up arrow key () to increment the enabled number. For storing data,
the number can be set to any value, overwriting existing data is allowed.
For recalling data, the number can only be set to used values.
the number can be set to any value, overwriting existing data is allowed.
For recalling data, the number can only be set to used values.
Note
If you press the up or down arrow key () once, the number
increments or decrements by one. To accelerate the increment or
decrement function, press and hold the up or down arrow.
increments or decrements by one. To accelerate the increment or
decrement function, press and hold the up or down arrow.
Storing a Measurement
To store a measurement:
1. Press
to enter Memory mode.
2. Press
and use the arrow keys () to set the data identity.
3. Press
to save the data.
•
If memory is full, FULL will appear on the primary display. Press to
choose another data identity, press to exit Memory mode.
choose another data identity, press to exit Memory mode.
•
If the memory is not full, the data will be saved, the tester will
automatically exit Memory mode and the display will revert back to the
previous test mode.
automatically exit Memory mode and the display will revert back to the
previous test mode.
•
If the data identity has been previously used, the display will show
STO? Press again to store the data, press to choose another
data identity, press to exit Memory mode.
STO? Press again to store the data, press to choose another
data identity, press to exit Memory mode.
Extended documentation mode:
For insulation and continuity tests, you can store additional information with the
measurement result. For more information, see "Measuring Insulation
Resistance" and "Measuring Continuity".
measurement result. For more information, see "Measuring Insulation
Resistance" and "Measuring Continuity".
Recalling a Measurement
To recall a measurement:
1. Press
to enter the Memory mode.
2. Press
to enter the Recall mode.
3. Use
and the arrow keys () to set the data identity. If no data has been
saved, all fields will be dashes.