U Reach CONRAD SATA-FESTPLATTEN-CLONER/ERASER PRO118 Manual Do Utilizador
Códigos do produto
PRO118
5
Chapter 2 - Function Introduction
1. Copy
It copies data from source HDD to target HDD. Please make sure you have
choose correct copy mode you like to use, about the three copy modes please
refer to function [6.1 Copy Area] for details.
choose correct copy mode you like to use, about the three copy modes please
refer to function [6.1 Copy Area] for details.
2. Compare
It is used to check if the data on source HDD is identical to target HDD after
duplication.
duplication.
3. Copy & Compare
It makes copy first and then compare copied HDD with source HDD to ensure
data correctness.
Before copy, there are two setups to be reminded:
data correctness.
Before copy, there are two setups to be reminded:
a. Shows the quantity of bad sector in Source and Target HDDs.
Copy Process
(if there is any bad sector)
The default setting is "System and Files".
Copied Time
Total data capacity
Copied data capacity
Copy Process
Copied Time
Source bad sector
Target bad sector
Copy Process