Nikon AW130 VNA843E1 Manual Do Utilizador
Códigos do produto
VNA843E1
Tech
ni
cal
Not
Not
e
s
185
4
Attach the underwater fiber-optic
cable to the cable adapter.
cable to the cable adapter.
• Connect the end of the cable with the
longer straight section (the end that
connects to SR-CP10A) to the cable
adapter’s fiber-optic connector.
connects to SR-CP10A) to the cable
adapter’s fiber-optic connector.
• After connecting, pass the cable through
the adapter’s two cable holders.
5
Slide the cable adapter that is
attached to the camera and cable
until it contacts the stay
mounting guide.
attached to the camera and cable
until it contacts the stay
mounting guide.
• Make sure that the cable does not come
loose from the cable holders.
6
Fully tighten the case/adapter
lock screw of the bracket to
secure the cable adapter.
lock screw of the bracket to
secure the cable adapter.
7
Pass the underwater fiber-optic
cable through the grip of the
bracket, from bottom to top.
cable through the grip of the
bracket, from bottom to top.