AEG AR 4025 BT 400425 Manual Do Utilizador

77

Time (is automatically set during RDS reception), radio 

station, programme type, frequency of the currently 

selected radio station, current DSP setting, informa-

tion on file names (only for playback MP3 or WMA 

file).

 

If no corresponding information is available, 

 

►

NONE is shown on the display.

If the information on the display is too long it is 

 

►

shown as scrolling text.

To restore the factory settings, press the 

RESET button (26) 

with a pointed object e.g. a ballpoint pen.

Reset the unit:

when using for the first time after connecting the 

 

■

cable,

if not all function buttons work,

 

■

if an error message is shown on the display.

 

■

Press the 

 

‹

MODE button repeatedly (1) until the radio 

frequency and the frequency band or radio station is 

shown on the display.

Press the 

 

‹

BAND button (18) to toggle between UKW 

(FM1, FM2, FM3) and medium wave (MW1, MW2). The 

selected frequency range is displayed.

Press the 

 

‹

 (20) or   (19) buttons to start the station 

search. SEARCH

 is shown on the display. The search is 

halted when a station is found.

Keep the 

 

■

 (20) or   (19) buttons pressed until  

MANUAL is shown on the display  

Press the 

 

■

 (26) or   (27) button to change the 

frequency in steps of 0.05 MHz (UKW) or 9 kHz (MW) 

until the desired frequency is set.

If no button is pressed for two seconds, automatic station 

search is automatically selected. 

AUTO is shown on the 

display.

6 stations can be preset for each frequency range.

Keep the required numeric button (11 to 16) pressed 

 

‹

for around 2 seconds to preset the currently set sta-

tion. After presetting, 1 beep is sounded (unless 

OFF has been selected).

Use the 

 

‹

BAND button (18) to select the desired  

frequency range.

Press one of the numeric buttons (11 to16) to tune 

 

‹

into the preset station.

Use the 

 

‹

BAND button (18) to select the desired  

frequency range.

Keep the 

 

‹

AS/PS button (17) pressed. SEARCH appears 

on the display. A search begins automatically. After 

searching, the six strongest stations are preset and 

the unit tunes into the preset stations in sequence 

for around 5 seconds. In doing so, the preset location 

flashes on the display. 

Press one of the numeric buttons (11 to 16) to select 

 

‹

the required station.

Press the 

 

‹

AS/PS button (17). The unit tunes into all 

stations briefly.

If you hear the station you would like to listen to, 

 

‹

press the 

AS/PS button (17). The selected station 

remains selected.

AF is a function which works with the help of the RDS 

(Radio Data System) and can only be used for UKW 

stations. The unit searches in the background for the fre-

quency giving the clearest reception for the preset station.

Press the 

 

‹

AF button (10) switch on/switch off this 

function.

AF is displayed: Function is activated and RDS-Informa-

tion is received.

AF flashes: No RDS information is received.

AF is not displayed: Function is deactivated.

At certain times, some stations split their schedules into 

regional programmes with differing content.

To play only the regional programmes of the station, 

 

‹

keep the 

AF button (10) pressed until REG ON appears 

on the display.

To play the networked programmes again, keep the 

 

‹

AF button (10) pressed until REG OFF appears on the 

display.

Alongside the station name, some UKW station also give 

information on the programme type of their programme.

You can search for stations of a specific type.

Press the 

 

‹

PTY button (5).

Select the required PTY identifier by turning the multi-

 

‹

jog (3). The PTY identifier is shown on the display.