Phoenix Contact Solenoid driver MACX MCR-EX-SL-SD-21-40-LP-SP 2924139 2924139 Ficha De Dados

Nov 13, 2013    1 / 7

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

The illustration shows the

versions with screw connection

Ex-i solenoid driver. For controlling Ex-i solenoid valves, alarm modules or LEDs installed in Ex

areas. Current limitation at 40 mA. For gases up to Group II C, loop-powered, electrical isolation, SIL

3.

 

Product Features

 Mechanically compatible with the DIN rail connector
 Various output characteristic curves compatible with standard solenoid valves
 Loop-powered: the required power is supplied via the control signal on the input side.
 Installation in zone 2, protection type "n" (EN 60079-15) permitted
 Up to SIL 3 according to EN 61508
 2-way electrical isolation
 Output [Ex ia] IIC/[Ex ia] IIB
 20 

30 V DC input

   

   

  

Key commercial data

1

4046356338493

Technical data

Dimensions

12.5 mm

99 mm

114.5 mm

Ambient conditions

-20 °C ... 60 °C (Any mounting position)

-40 °C ... 80 °C

≤ 2000 m

10 % ... 95 % (no condensation)

IP20

Output data