Fujifilm FinePix Z10FD Pink FXZ10FD/PINK Manual Do Utilizador

134

Troubleshooting

Flash

Cannot use the 
flash.

The shutter button was pressed while the 
flash was charging.

Wait until the charging is completed before 
pressing the shutter button.

53

The [

 SHOOTING MODE] is set to 

, 

,, , 

or .

Change the Shooting mode.

44

The battery has run out.

Charge the battery or load fully charged 
battery.

13, 15

Continuous shooting is selected.

Set continuous shooting to OFF.

61

The flash mode is set to C.

Set the flash mode to something other 
than C.

52

The flash settings 
are restricted and 
cannot be 
selected.

The [

 SHOOTING MODE] is set to 

AUTO, , , 

,, ., /, ,  , , 

, , , , 

or .

The flash settings are restricted because 
the camera settings are tailored to the 
scene being shot. Change the Shooting 
mode for a wider range of flash settings.

44

The playback 
image is dark 
even though the 
flash was used.

The subject is too far away.

Move to within the effective flash range 
before taking the picture.

50, 53

Your finger was covering the flash.

Hold the camera correctly.

25

Photographed images

The image is 
blurred.

The lens is dirty.

Clean the lens.

AF frame (lit red) and { appeared when 
taking pictures.

Check the focus on the subject and take 
pictures.

26, 
28, 

126

 appeared when taking pictures.

It may cause camera shake. Hold the 
camera steadily.

27, 

126

There is speckling 
on the image.

The picture was taken with a slow shutter 
speed (long exposure) in a high-
temperature environment.

This is a characteristic of CCDs and does 
not indicate a camera fault.

–