Finder 83.82.0.240.0000 Time Delay Relay, Timer, IP20 83.82.0.240.0000 Ficha De Dados
Códigos do produto
83.82.0.240.0000
83.01
83.02
83.52
1 CO (SPDT)
2 CO (DPDT)
2 CO (DPDT)
16/30
12/30
12/30
250/400
250/400
250/400
4,000
3,000
3,000
750
750
750
0.5
0.5
0.5
16/0.3/0.12
12/0.3/0.12
12/0.3/0.12
300 (5/5)
300 (5/5)
300 (5/5)
AgNi
AgNi
AgNi
24…240
24...240
24...240
24…240
24...240
24...240
< 1.5 / < 2
< 2 / < 2
< 2 / < 2
16.8...265
16.8...265
16.8...265
16.8...265
16.8...265
16.8...265
(0.05…1)s, (0.5…10)s, (0.05…1)min, (0.5...10)min, (0.05...1)h, (0.5...10)h, (0.05...1)d, (0.5...10)d
± 1
± 1
± 1
200
200
200
50
50
50
± 5
± 5
± 5
50·10
3
60·10
3
60·10
3
–20…+60
–20…+60
–20…+60
IP 20
IP 20
IP 20
Wiring diagram
(without control signal)
•
Multi-voltage
•
Multi-function
•
Timing can be regulated using
ext. Potentiometer
•
2 timed contacts or 1 timed +
1 instantaneous contact
•
Multi-voltage
•
Multi-function
•
Timing can be regulated using
ext. Potentiometer
•
2 timed contacts or 1 timed +
1 instantaneous contact
•
3 functions with pause option
•
Multi-voltage
•
Multi-function
AI: On-delay
DI: Interval
GI: Pulse delayed
SW: Symmetrical flasher (starting pulse on)
BE: Off-delay with control signal
CE: On- and off-delay with control signal
DE: Interval with control signal on
WD: Watchdog (Retriggerable interval
DI: Interval
GI: Pulse delayed
SW: Symmetrical flasher (starting pulse on)
BE: Off-delay with control signal
CE: On- and off-delay with control signal
DE: Interval with control signal on
WD: Watchdog (Retriggerable interval
with control signal on)
AI: On-delay
DI: Interval
GI: Pulse delayed
SW: Symmetrical flasher (starting pulse on)
BE: Off-delay with control signal
CE: On- and off-delay with control signal
DE: Interval with control signal on
WD: Watchdog (Retriggerable interval
DI: Interval
GI: Pulse delayed
SW: Symmetrical flasher (starting pulse on)
BE: Off-delay with control signal
CE: On- and off-delay with control signal
DE: Interval with control signal on
WD: Watchdog (Retriggerable interval
with control signal on)
AE: On-delay with control signal
EEa: Interval with control signal off
EEa: Interval with control signal off
(retriggerable)
FE: Interval with control signal on and off
GE: Pulse delayed with control signal on
IT:
GE: Pulse delayed with control signal on
IT:
Timing step
BEp: Off-delay with control signal and
pause signal
DEp: Interval with control signal on and
pause signal
SHp: “Shower” function
Wiring diagram
(with control signal)
(with control signal)
(without control signal)
Contact specification
Contact configuration
Rated current/Maximum peak current
A
Rated voltage/Maximum switching voltage V AC
Rated load AC1
VA
Rated load AC15 (230 V AC)
VA
Single phase motor rating (230 V AC)
kW
Breaking capacity DC1: 30/110/220 V
A
Minimum switching load
mW (V/mA)
Standard contact material
Supply specification
Nominal voltage (U
N
)
V AC (50/60 Hz)
V DC
Rated power AC/DC
VA (50 Hz)/W
Operating range
V AC
V DC
Technical data
Specified time range
Repeatability
%
Recovery time
ms
Minimum control impulse
ms
Setting accuracy-full range
%
Electrical life at rated load in AC1
cycles
Ambient temperature range
°C
Protection category
Approvals (according to type)
1
Features
Multi-function timer range
83.01 - Multi-function & multi-voltage, 1 Pole
83.02 - Multi-function & multi-voltage,
83.01 - Multi-function & multi-voltage, 1 Pole
83.02 - Multi-function & multi-voltage,
2 Pole (timed + instantaneous options),
external time setting potentiometer
option
external time setting potentiometer
option
83.52 - Multi-function & multi-voltage,
2 Pole (timed + instantaneous options),
external time setting potentiometer
option, pause function option
external time setting potentiometer
option, pause function option
•
22.5 mm wide
•
Eight time scales from 0.05s to 10 days
•
High input/output isolation
•
Wide supply range (24...240)V AC/DC
•
35 mm rail (EN 60715) mount
•
“Blade + cross” - both flat blade and cross
head screw drivers can be used to adjust the
range and function selectors, the timing
trimmer, and to disengage the rail mounting
clip
head screw drivers can be used to adjust the
range and function selectors, the timing
trimmer, and to disengage the rail mounting
clip
•
Multi-voltage versions with “PWM clever”
technology
technology
For outline drawing see page 5
II-2014, www
.finder
net.com
Wiring
diagram
Wiring
diagram
(with control signal and external
potentiometer connection)
Wiring
diagram
(with control signal and pause signal)
Wiring
diagram
83 Series - Modular timers 12 - 16 A
83
SERIES
H