Arnold Rak Heating Technology Floor tempering for laminate 1300300 Manual Do Utilizador
Códigos do produto
1300300
Installation Instructions
The surface heating for Laminate, series FH L
Important: These instructions must be read carefully before commencing the installation procedure. An
incorrect installation could damage the heating system and suspend the guarantee.
Consider during the selection of the laminate that it can be adapted for electrical heating
systems. Consult your seller.
incorrect installation could damage the heating system and suspend the guarantee.
Consider during the selection of the laminate that it can be adapted for electrical heating
systems. Consult your seller.
Product information
The purpose of the heating elements the series FH L is the installation directly underneath the laminate
floor surface (dry laying). The heating elements FH L are installed to maintain a comfortable room
temperature. We recommend the use of a comfort thermostat with floor sensor in order to assure a high
quantity of comfort, economy and security.
The heating elements are easy to install, they do not require additional installation efforts and no further
maintenance.
The manufacturer issues a guarantee of 10 years for the heating conductor. This guarantee does not
include any preparatory work or replacement of surface covering material. Please pay careful attention to
the information given on the guarantee card. The specified entries (measured values made on the
completed installation) must be recorded on that guarantee card. The manufacturer will not accept
responsibility for any faults which can be attributed to measurements which either have not been made
and recorded at all or which have been made incorrectly.
Technical data
Rated voltage
230 V AC
Rated Heating Capacity
160 W/m
2
Operating temperature
60°
С
Thickness of the elements
1,5 mm
Distance between meanders
4 cm
Connection cable
2 x 4 m
Insulation Heating Resistor
FEP (Teflon©, a trademark of Dupont)
Shielding braid
Copper
Cable sheath
FEP (Teflon©, a trademark of Dupont)
Protection class
IP X7
Surface area in
m
2
Dimensions in
cm
Capacity in
Watt
Resistance in
Ohm
0,75
50
х 150
120
440
1,0
50
х 200
160
330
1,5
50
х 300
240
220
2,0
50
х 400
320
165
2,5
50
х 500
400
132
3,0
50
х 600
480
110
3,5
50
х 700
560
95
4,0
50
х 800
640
83
4,5
50
х 900
720
73
5,0
50
х 1000
800
66
6,0
50
х 1200
960
55
7,0
50
х 1400
1120
47
8,0
50
х 1600
1280
41
9,0
50
х 1800
1440
37
10,0
50
х 2000
1600
33
GB