ABUS FU9010 Manual Do Utilizador

37 

If a particular event such as a panic alarm or a fire occurs, the ABUS wireless alarm 
system informs the occupants of the object about the current status. It does this by 
playing a local voice message. You can activate or deactivate voice messages according 
to the event. In the default factory setting, all voice messages are activated. 
 
To activate/deactivate voice messages: 

1.  Under user functions, press [7] for Voice Messages. 

2.  Enter your user PIN and press 

. 

3. Select 

[4] for Local Announcement Messages. You see a list of system 

events. 

4.  From this list of system events, select the events for which you want to 

activate/deactivate voice messages: 
[1] Intruder alarm, 

[2] Fire alarm,  

 

[3] Emergency alarm 

[4] Panic alarm,  

[5] Away arming 

[6] Stay arming,  

[7] Auto arm/disarm 

[8] Disarming,   

[9] Exit delay 

[10] Entry delay,  

[11] Functions Key messages 

[12] Trouble messages, [13] Walk test 

5. Press 

 to select between the following options: 

[N]: The voice message is deactivated for the selected event. 
[Y]:  The voice message is activated for the selected event. 

Your ABUS wireless alarm system can record a local voice message up to 8 seconds 
long. You can play the message locally over the loudspeakers of the ABUS wireless 
alarm system. When you record a new message, the old message is deleted. 
 
To record a message: 
1. Press 

 and keep it pressed for 2 seconds. The MESSAGE LED flashes 

slowly. 

2.  After the acoustic signal, speak your message at a short distance into the 

microphone of the ABUS wireless alarm system. The microphone is in the bottom 
left corner of the panel. When you are finished, press 

 again. The MESSAGE 

LED now flashes fast. 

 
To play back a message: 
Press 

: the recorded message is played back.