Megatron Indoor panel mounted lamp MT76621 White P20d MT76621 Ficha De Dados

Códigos do produto
MT76621
Página de 1
F25245RC/ F25745RC/ F26645RC/ F26745RC
Instruction Manual
GENOA
TECHNICAL SPECIFCATION
CAUTIONS
Read the entire manual carefully before installation and operation.
It is recommended that the installation and maintenance be performed by a 
licensed and qualified electrician.
Switch off the power source before installation, replacement and cleaning.
Wearing gloves during installation is suggested for keeping the module in the 
best condition. 
Before replacement of luminaire or module, turn off and allow them to cool 
down. Heat-resistant gloves are mandatory when handling the luminaire or 
module.
In case the external flexible power cord is damaged, the replacement should be 
handled by a licensed and qualified electrician for safety purpose. 
The minimum safety distance from the illuminated object is 0.1m. 
Only the MEGAMAN  TECOH  CFx (Max.30W or Max.20W) can be used with 
luminaire. Using incandescent lamp, halogen or other kinds of light source will 
be resulted in risk of fire or electric shock. 
When this recessed luminaire is installed into false ceiling, the exposed part of 
the luminaire has a rated IP23, whereas the unexposed part has a rated IP20. 
The manufacturer accepts no liability for any damage resulting from the misuse 
of the luminaire or from when it is used with inappropriate equipment. 
Consult your dealer if you have any enquiries.
0.1
m
---------
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
Instant restart is allowed.
Designed for indoor application and recessed ceiling installation only. 
ATTENTION
• 
• 
Installation
Max. 
25mm
Model No.
F25245RC
F25745RC
F26645RC
F26745RC
Cut-Out Ø (mm)
140
140
160
160
Model No.
F25245RC
F25745RC
F26645RC
F26745RC
W(mm) H(mm)
110         170
110         170
110         170
110         170
W
W
H
• 1. Snap in the LED Module into the luminaire 
       and match with the slot of the luminaire. 
       There will be a sound  "click" if the LED 
       module and luminaire is locked.
• 2. Push the reflector into the luminaire.
1
1
2
               Before the installation, make sure that the 
                mounting surface between the LED module 
                and the luminaire is flat, dry and clean. 
                Remove the sticker from the base plate of the 
                thermal pad cover before use.
• 
• 
Model Number
Lamp Holder
Voltage
Frequency
Wattage
IP Rating
F25245RC                           F25745RC                                                   F26645RC                                                  F26745RC
PHJ65d-2                                              
                    PHJ65d-2                                                   PHJ65d-2                                                  PHJ65d-2
Max. 30W
                    Max. 20W
                                             Max. 30W                                                   Max. 20W
220-240V~
                    220-240V~
50/60Hz
                    50/60Hz
220-240V~         
220-240V~
50/60Hz
50/60Hz
MEGAMAN  TECOH  CFx
MEGAMAN  TECOH  CFx
MEGAMAN  TECOH  CFx
MEGAMAN  TECOH  CFx
GB
Correct Disposal of This Product
This  marking  indicates  that  this  product  should  not  be  disposed  with  other  household  wastes 
throughout  the  EU.  To  prevent  possible  harm  to  the  environment  or  human  health  from 
uncontrolled  waste  disposal,  recycle  it  responsibly  to  promote  the  sustainable  reuse  of  material 
resources.  To  return  your  used  device,please  use  the  return  and  collection  systems  or  contact 
the  retailer  where  the  product  was  purchased.  They  can  take  this  product  for  environmental  safe 
recycling.
LED
Safety Distance:
Step2
Step1
MEGATRON
8010GRC38A
IDV GmbH
Birkenweiherstr. 2
D-63505 Langenselbold
Germany
MEGATRON
IP20
IP20
IP20
IP20
TYPE OF CONNECTION
Working with terminal block LA5111
Single Type Connection
220-240V~
Input voltage
Power Cord Preparation:
6mm
18-26mm
Press downwards to 
secure connection wire
Working with terminal block LA5113
Stripping Preparation
0.75-2.5mm
2
For solid 
0.75-2.5mm
2
 max.    1.8mm
For wire ends 
1mm
Power Cord 
11-12mm
18-23mm
Press downwards to secure
connection wire
Expandable up to 230W max.
220-240V~
Input voltage
Single Type Connection
Parallel Type Connection
220-240V~
Input voltage
Preparation:
For tinned 
wire ends
conductors
with ferrule
MM Code
MT7661X
MT76XXX
MT7662X
MT76XXX
1
3
2
Twist the reflector to the slot of the luminaire. 
 1.
 2.
 3.
Unlock and remove the reflector 
from the luminaire.
Remove the module by twisting it to 
the slot of the lamp holder, unlock 
and remove the module form the 
luminaire. 
When the recessed luminaire is installed into ceiling areas, the exposed part of
the luminaire has a rated ingress protection of IP23, whereas the unexposed part.
has a rated ingress protection of IP20.
Recommended working temperature of luminaire is -30°C  to + 40° C. 
• 
• 
L
N