Phoenix Contact Type 3 surge protection device MNT-TELE S/WH 2880901 2880901 Ficha De Dados

Códigos do produto
2880901
Página de 6
Nov 13, 2013    3 / 6
Technical data
Standards (protective circuit, power supply)
Standards/regulations
SEK SS 428 08 34
Protective circuit, information technology
Arrester rated voltage U
C
 (Core-Core)
200 V DC
Arrester rated voltage U
C
 (Core-Earth)
380 V DC
Nominal current I
N
1.5 A (25 °C)
Operating effective current I
C
 at U
C
≤ 150 µA
Residual current I
PE
≤ 2 µA
Insulation resistance R
iso
≥ 1 MΩ (core-core)
Insulation resistance R
iso
≥ 1 GΩ (Core-PE)
Nominal discharge current I
n
 (8/20) µs (Core-Core)
1 kA
Nominal discharge current I
n
 (8/20) µs (Core-Earth)
2.5 kA
Max. discharge current I
max
 (8/20) µs
2.5 kA
Voltage protection level U
P
 (Core-Core)
≤ 460 V (C2 - 1 kA)
Voltage protection level U
P
 (Core-Core)
≤ 350 V (C3 - 25 A)
Voltage protection level U
P
 (Core-Earth)
≤ 900 V (C2 - 2 kA)
Voltage protection level U
P
 (Core-Earth)
≤ 900 V (C3 - 100 A)
Response time tA (Core-Core)
≤ 25 ns
Response time tA (Core-Earth)
≤ 100 ns
Cut-off frequency fg (3 dB), sym. in 100 Ohm system
typ. 4 MHz
Cut-off frequency fg (3 dB), sym. in 150 Ohm system
typ. 3 MHz
Cut-off frequency fg (3 dB), sym. in 600 Ohm system
typ. 700 kHz
Capacity (Core-Core)
typ. 1 nF
Capacity (Core-Earth)
typ. 5 pF
Output voltage limitation at 1 kV/µs (wire-wire)
≤ 360 V
Residual voltage at I
n
, (conductor-conductor)
≤ 500 V
Residual voltage at I
n
, (conductor-ground)
≤ 30 V
Residual voltage with Ian (10/1000)µs (conductor-conductor)
≤ 35 V
Residual voltage with Ian (10/1000)µs (conductor-ground)
≤ 35 V
Surge carrying capacity in acc. with IEC 61643-21 (Core-Core) C2 (2 kV / 1 kA)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Core) C3 (25 A)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Earth) C2 (4 kV / 2 kA)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Earth) C3 (100 A)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Earth) D1 (500 A)
Alternating current carrying capacity in acc. with IEC 61643-21
(Core-Core)
250 mA - 1 s
Alternating current carrying capacity in acc. with IEC 61643-21
(Core-Earth)
10 A - 1 s
Pulse reset time tr in acc. with IEC 61643-21 (Core-Core)
≤ 10 ms
Overload fault mode in acc. with IEC 61643-21 (Core-Core)
Mode 3
Overload fault mode in acc. with IEC 61643-21 (Core-Earth)
Mode 3