Lecroy WS3K-EMB Ficha De Dados

Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience  
difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: 

•

  No charge for return shipping 

•

  Long-term 7-year support

•

  Upgrade to latest software at no charge

© 2014 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice.  

Product or brand names are trademarks or requested trademarks of their respective holders. 

wavesurfer3k_ds-26sept14

1-800-5-LeCroy  

200 MHz, 4 GS/s, 2 Ch, 10 Mpts/Ch with  

10.1” Touch screen Display

WaveSurfer 3022

200 MHz, 4 GS/s, 4 Ch, 10 Mpts/Ch with  

10.1” Touch screen Display

WaveSurfer 3024

350 MHz, 4 GS/s, 4 Ch, 10 Mpts/Ch with  

10.1” Touch screen Display

WaveSurfer 3034

500 MHz, 4 GS/s, 4 Ch, 10 Mpts/Ch with  

10.1” Touch screen Display

WaveSurfer 3054

750 MHz, 4 GS/s, 4 Ch, 10 Mpts/Ch with  

10.1” Touch screen Display

WaveSurfer 3074

÷10 Passive Probe (Total of 1 Per Channel), 1 Micro SD card (Installed),  

Micro SD card adapter, Protective Front Cover, Getting Started Guide,  

Commercial NIST Traceable Calibration with Certificate, Power Cable for  

the Destination Country, 3-year Warranty

External GPIB Accessory

USB2-GPIB

Soft Carrying Case

WS3K-SOFTCASE

Rack Mount Accessory

WS3K-RACK

German Front Panel Overlay

WS3K-FP-GERMAN

French Front Panel Overlay

WS3K-FP-FRENCH

Italian Front Panel Overlay

WS3K-FP-ITALIAN

Spanish Front Panel Overlay

WS3K-FP-SPANISH

Japanese Front Panel Overlay

WS3K-FP-JAPANESE

Korean Front Panel Overlay

WS3K-FP-KOREAN

Chinese (Tr) Front Panel Overlay

WS3K-FP-CHNES-TR

Chinese (Simp) Front Panel Overlay

WS3K-FP-CHNES-SI

Russian Front Panel Overlay

WS3K-FP-RUSSIAN

MSO software option and 16 Channel Digital probe leadset

WS3K-MSO

Function Generator Option

WS3K-FG

I

2

C, SPI, UART and RS-232 Trigger and Decode Option

WS3K-EMB

250 MHz Passive Probe 10:1, 10 MΩ

PP019

500 MHz Passive Probe 10:1, 10 MΩ

PP020

700 V, 15 MHz High-Voltage Differential Probe

AP031

200 MHz, 3.5 pF, 1 MΩ Active Differential Probe

ZD200

1 GHz, 1.0 pF, 1 MΩ Active Differential Probe

ZD1000

Deskew Calibration Source for CP031 and CP030

DCS015

30 A; 50 MHz Current Probe – AC/DC; 30 A

rms

; 50 A

peak

 Pulse 

CP030

30 A; 100 MHz Current Probe – AC/DC; 30 A

rms

; 50 A

peak

 Pulse

CP031

150 A; 10 MHz Current Probe – AC/DC; 150 A

rms

; 500 A

peak

 Pulse

CP150

500 A; 2 MHz Current Probe – AC/DC; 500 A

rms

; 700 A

peak

 Pulse 

CP500

100:1 400 MHz 50 MΩ 1 kV High-voltage Probe

HVP120

10:1/100:1 200/300 MHz, 50 MΩ High-voltage Probe  

600 V/1,2 kV Max. Volt. DC

PPE1.2KV

100:1 400 MHz 50 MΩ 2 kV High-voltage Probe

PPE2KV

100:1 400 MHz 50 MΩ 4 kV High-voltage Probe

PPE4KV

1000:1 400 MHz 50 MΩ 5 kV High-voltage Probe

PPE5KV

1000:1 400 MHz 50 MΩ 6 kV High-voltage Probe

PPE6KV

1 GHz, 0.9 pF, 1 MΩ 

High Impedance Active Probe

ZS1000

Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ  

High Impedance Active Probe

ZS1000-QUADPAK

25 MHz High Voltage Differential Probe

HVD3102

120 MHz High Voltage Differential Probe

HVD3106

I

2

C

Trigger on START, ReSTART, STOP, ADDR, DATA, ADDR+DATA, Data Length, or Missing ACK. 7 or 10-bit ADDR are supported 

with full Read, Write, or R/W = “Don’t Care”. Choose to trigger on ADDR values that include/don’t include R/W bit in the value. 

DATA conditions support <=, <, =, >, >=, <>, in range, out of range, and don’t care. DATA can be setup in either Hexadecimal (0 

to 12 bytes supported and can be defined by nibble) or Binary (any combination of 0, 1, or X for 1-96 bits). DATA patterns can 

be set to start on any bye in a 2048-byte window (EEPROM mode only). ACK condition can be selected as ACK, NO ACK, and 

DON’T CARE. Full range of bit rates supported for Standard, Fast, Fast-Mode Plus, and High speed mode.  Bit rate is auto-

detected. Trigger on any analog or digital channel.  Triggering on EXT or EXT/5 is not supported. 

SPI

Trigger on DATA.DATA can be setup in either Hexadecimal (0 to 12 bytes supported and can be defined by nibble) or Binary 

(any combination of 0, 1, or X for 1-96 bits). All bit rates are supported and are auto-detected. Trigger on any analog or digital 

channel.  Triggering on EXT or EXT/5 is not supported. 

UART / RS-232

Trigger on DATA or Parity ERROR.DATA conditions support <=, <, =, >, >=, <>, in range, out of range, and don’t care. DATA can be 

setup in either Hexadecimal (0 to 12 bytes supported and can be defined by nibble) or Binary (any combination of 0, 1, or X for 

1-96 bits). Data position can be specified anywhere in a 2048 byte sequence. All bit rates are supported between 300 b/s and 

10 Mb/s. Trigger on any analog or digital channel.  Triggering on EXT or EXT/5 is not supported.