Gw Instek GDS-3354 4-channel oscilloscope, Digital Storage oscilloscope, GDS-3354 Ficha De Dados

The GDS-3000 Series digital storage oscilloscope is a full-featured and powerful tool that allows
you to tackle complex measurement issues with ease.
The GDS-3000 Series, carrying a maximum bandwidth of 500MHz, is equipped with a real-time
sampling rate up to 5GSa/s and an equivalent-time sampling rate of 100GSa/s.  The large 8-inch
SVGA TFT LCD screen, combined with the advanced digital signal processing technology

VPO,

provides meticulous detail and clarity for the displayed waveforms. The GDS-3000 Series gives you
confidence not to miss any part of the test signal in the product verification and debugging stages
and allows you to speed up your task without hesitation.

–

With widespread applications of embedded system using serial bus communications, resolving
unexpected issues, such as propagation delay and bus contention, is often a challenge to design
and testing engineers. The GDS-3000 Series provides (optional) design and testing engineers with
powerful tools for the communication analysis and debugging of the most popular serial interface
projects including I  C ,SPI and UART.
To fulfill the increasing power measurement demands, as a green energy trend, GDS-3000 provides
an embedded power-measurement software (optional), which includes measurements of Power
Quality, Harmonics, Ripple and Inrush Current, meeting requirements of most power
measurement standards.

With 5GSa/s sampling and Visual Persistence Oscilloscope (VPO) technology, GDS-3000 displays
waveforms truthfully and captures less-frequently-occurred signals, like glitches or runts,
simultaneously without missing any spot of waveform information.  A unique Split-screen feature
allows each input channel to be operated independently with respective setting and waveform
display. This gives users flexibility to use GDS-3000 Series as a multi-scope-in-one DSO.
To alleviate the burden of manual operation and to reduce human error, additional features such
as auto range are used to automatically adjust the horizontal and vertical scale of a displayed
signal so that waveforms are displayed with the best possible viewing ratio.
The I/O Interfaces give you a good range of choices and convenience. In the front panel, a USB
host port is used for easy data access. And in the rear panel, another USB port can be used for
remote control or for screen printout directly from PictBridge compatible printers. In addition,
RS-232 and LAN interfaces provide the flexibility supporting broad range of applications. The
SVGA video output port allows you to display the screen on an external projector or monitor for
information sharing and discussion.

The GDS-3000 VPO (Visual Persistence Oscilloscope) technology adopts a very unique signal-
processing design. To significantly increase the data processing speed and the waveform capture
rate, GDS-3000 uses FPGA platform to replace conventional serial microprocessor architecture.
This unique technology allows the GDS-3000 Series to show waveforms in a fashion like that of an
analog oscilloscope. The VPO three dimension waveform display, containing the information of
amplitude, time and intensity, provides more useful signal contents for the analysis of rapid-
changed events, such as video, jitter and infrequent signals.

Ω

Ω

Ω