Netgear XAVB6504 XAVB6504-100PES Ficha De Dados
Códigos do produto
XAVB6504-100PES
Using NETGEAR genie
27
Powerline PassThru Adapter
Add a Device to the Powerline Network
If you are adding a device to your Powerline network and your network uses the default
encryption key, plug the new device into a power outlet.
encryption key, plug the new device into a power outlet.
If your Powerline network uses a private encryption key, you can set the security in one of
two ways:
two ways:
•
16.
•
Use NETGEAR genie to add the new device to your network, as described in the
following procedure.
following procedure.
To add a Powerline device to the Powerline network using NETGEAR genie:
1.
Plug the Powerline device into a wall outlet near your computer for initial setup.
2.
Connect the Powerline device to an Ethernet port on your computer using the Ethernet
cable that came with your adapter.
cable that came with your adapter.
3.
Install NETGEAR genie on the computer.
See
4.
Launch NETGEAR genie on the computer and navigate to the Powerline map.
See
5.
Click the Refresh icon and wait for NETGEAR genie to detect the new device.
6.
Right-click the new device’s icon.
7.
On the pop-up menu that displays, select Security.
8.
Set the encryption key for the device.
See
Make sure that you enter the same encryption key that
your other Powerline devices use.
your other Powerline devices use.