Lappkabel 4550115, Single Core Wiring Cable, , AWG, Transparent Sheath 4550115 Ficha De Dados
Códigos do produto
4550115
U.I. Lapp
GmbH
DATA SHEET
Li2YCY single core
DB4550115
valid from: 10/19/2010
Product Developement Cable
Document:
DB4550115DE
page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
Application
Li2YCY single core is a screened, single core for wiring of measurement instruments, transmission and receiving equipment,
switch gear cabinets and electrical components. The screening provide protection against electrical interferences.
The cable is used in dry, damp and wet interiors but not appropriate for outside usage.
switch gear cabinets and electrical components. The screening provide protection against electrical interferences.
The cable is used in dry, damp and wet interiors but not appropriate for outside usage.
This cable confirms to RoHS directive (2002/95/EG).
Design
Conductor
tinned copper wires, conductor make-up:
0.14 mm²: No. of wires x Ø of wire 18 x 0,10, resistance max. 142.0 Ω/km
0.25 mm²: No. of wires x Ø of wire 14 x 0,15, resistance max. 82.0 Ω /km
0.5 bis 2.5 mm²: according to VDE 0295, class 5
0.14 mm²: No. of wires x Ø of wire 18 x 0,10, resistance max. 142.0 Ω/km
0.25 mm²: No. of wires x Ø of wire 14 x 0,15, resistance max. 82.0 Ω /km
0.5 bis 2.5 mm²: according to VDE 0295, class 5
Insualation
PE compound
Screen
braid of tinned copper wires
Outer sheath
PVC TM2 acc. to VDE 0207 part 5
Colour of the sheath: transparent
Colour of the sheath: transparent
Electrical properties at 20°
Specific insulation resistance
> 2 G Ω x cm
Peak working voltage
500 V (not for power applications)
Test voltage
1200 V
Mechanical and thermal properties
Temperature range
Flexing: - 5˚C up to +70˚C
Fixed installation: - 30˚C up to +80˚C
Fixed installation: - 30˚C up to +80˚C
Flammability
flame retardant acc. to IEC 60 332-1-2
Design and characteristics is similar to VDE 0812.