Sapphire RADEON HD 2900XT 512MB PCI-E 102-B00602-00-AT Manual Do Utilizador

Remove any existing VGA Card from your 
computer.
Or, if your computer has any on-board 
graphics capability, you may need to disable 
it on the motherboard. For more information, 
see your computer documentation.
(If the old VGA Card sticks, rock it gently 
from end to end. Remember to save the 
screw.)

Locate the slot. If necessary, remove the 
metal cover from this slot; then align your 
VGA Card with the PCI/AGP/PCI-E slot, and 
press it in firmly until the card is fully seated.
(Grasp the VGA Card by the top edge and 
carefully seat it into the slot. Ensure that the 
metal contacts are completely pushed into 
the slot.)

Replace the screw to fasten the card in 
place, and replace the computer cover.

Plug the display cable into VGA Card; then 
turn on the computer andmonitor. If your VGA 
Card came with a DVI connector, you can 
connect a flat panel display to the 
appropriate connector, as shown ...
(Make sure all cables are securely 
connected.)

Screw

VGA Card

Display Cable

Screw

Existing
VGA Card

VGA Card

Slot

To VGA Monitor
(All VGA Cards)

To Flat Panel/LCD Display
(DVI-Ready VGA Cards Only)