Absima POLYCARBONAT SPRAY PAINTZ MET. BLAU 3500032 Ficha De Dados

Códigos do produto
3500032
Página de 8
Extinguishing agents to be
avoided:
none
6 Accidental release measures:
6.1 Personal precautions, protective equipment and emergency procedures:
Do  not  walk  into  or  touch  spilled  substances  and  avoid  inhalation  of  fumes,  smoke,  dusts  and  vapours  by  staying  up
windRemove any contaminated clothing and used contaminated protective equipment and dispose of it safely.
6.2 Environmental precautions:
do not allow to flow into sewers or open water.
6.3 Methods and material for containment and cleaning up:
remove by using absorbent material.
6.4 Reference to other sections:
for further information check sections 8 & 13.
7 Handling and storage:
7.1 Precautions for safe handling:
handle with care to avoid spillage.
7.2 Conditions for safe storage, including any incompatibilities:
keep in a sealed container in a closed, frost-free, ventilated room.
7.3 Specific end use(s):
/
8 Exposure controls/personal protection:
8.1 Control parameters:
Listing of the hazardous ingredients in section 3, of which the TLV value is known
Dimethylether 1,920 mg/m³, Acetone 1,210 mg/m³, n-Butylacetate 723 mg/m³, Methyl ethyl ketone 600 mg/m³, 2-methoxy-1-
methylethyl acetate 275 mg/m³
8.2 Exposure controls:
Inhalation
protection:
if necessary, use an air-purifying face mask in case of respiratory hazards.
Skin
protection:
handling  with  butyl-gloves.  Thoroughly  check  gloves  before  use.  Take  of  the  gloves  properly
without touching the outside with your bare hands. The manufacturer of the protective gloves has
to be consulted about the suitability for a specific work station. Wash and dry your hands.
Eye
protection:
keep  an  eye-rinse  bottle  within  reach.  Tight-fitting  safety  goggles.  Wear  a  face  shield  and
protective suit in case of exceptional processing problems.
4/8