Graupner Hendheld RC 2.4 GHz No. of channels: 8 33116 Ficha De Dados
Códigos do produto
33116
13
Description of radio control set
Specification,
mx-16 HoTT transmitter
Frequency band
2,4 … 2,4835 GHz
Modulation
FHSS
Transmitter power
see Country setting, page 135
Control functions
Eight functions; four with trims
Temperature range
-10 … +55°C
Aerial
folding
Operating voltage
3,4 … 6 V
Current drain
approx. 180 mA
Dimensions
approx. 190 x 195 x 90 mm
Weight
approx. 770 g with transmitter
battery
battery
Accessories
Order No. Description
1121
Order No. Description
1121
Neckstrap, 20 mm wide
70
Neckstrap, 30 mm wide
3097
Wind-shield for hand-held transmitter
Trainer leads for
mx-16 HoTT:
Replacement parts
Order No.
Order No.
Description
2498.4FBEC 4NH-2000 RX RTU, flat-pack
33800
33800
HoTT transmitter aerial
Specification, GR-16 HoTT receiver
Operating voltage
Operating voltage
3,6 … 8,4 V*
Current drain
ca. 70 mA
Frequency band
2,4 … 2,4835 GHz
Modulation
FHSS
Aerial
Diversity aerials,
2 x approx. 145 mm long,
approx. 115 mm encapsu-
lated and approx. 30 mm
active
2 x approx. 145 mm long,
approx. 115 mm encapsu-
lated and approx. 30 mm
active
Servo sockets
8
Sensor socket
1
Temperature range
approx. -10° … +55°C
Dimensions
approx. 46 x 21 x 14 mm
Weight
approx. 12 g
* The permissible operating voltage range stated above applies to
the receiver only! Please note in this regard that the receiver’s input
voltage is passed directly (i.e. unregulated) to the servo sockets, but
the permissible operating voltage range of the overwhelming major-
ity of servos, speed controllers, gyros etc. which can be connected
to the receiver is only 4.8 to 6 Volt!
The set Order No. 33116 contains
mx-16 HoTT micro-computer transmitter with integral
4NH-2000 RX RTU flat-pack NiMH transmitter battery,
Order No.
mx-16 HoTT micro-computer transmitter with integral
4NH-2000 RX RTU flat-pack NiMH transmitter battery,
Order No.
33116.2 (specification reserved), plug-type
battery charger (5,6 V / 200 mAh), Graupner|SJ GR-16
HoTT bi-directional receiver, Order No.
HoTT bi-directional receiver, Order No.
33508, micro-SD
card, USB interface, Order No.
7168.6 and adapter lead,
Order No.
7168.6S.
Recommended battery chargers (optional)
Order
No.
No.
Description
220
V mains conn.
12
V DC connect.
Suitable for
the following
battery types
Integ
ral
charge
. lead
NiCd
NiMH
LiP
o
Lead-ac.
6411
Ultramat 8
x x x x x
6463
Ultramat 12 plus
x x x x x x
6464
Ultramat 14 plus
x x x x x x x
6466
Ultra Trio plus 14
x x x x x x x
6468
Ultramat 16S
x x x x x x x
6469
Ultra Trio Plus 16
x x x x x
x
6470
Ultramat 18
x x x x x x x
6475
Ultra Duo Plus 45 x x x x x x x
6478
Ultra Duo Plus 60 x x x x x x x
6480
Ultra Duo Plus 80 x x x x x x x
To charge the batteries you will also need the transmitter charge lead,
Order No.
3022 and the receiver charge lead, Order No. 3021.
For details of additional battery chargers, and details of the chargers
listed here, please refer to the main Graupner FS catalogue, or our
Internet site at www.graupner.de.
For information on additional accessories please refer to
the Appendix or visit our Internet site at www.graupner.
de. Alternatively you can enquire at your local model
shop, where the staff will be pleased to advise you.
the Appendix or visit our Internet site at www.graupner.
de. Alternatively you can enquire at your local model
shop, where the staff will be pleased to advise you.