Graupner Hendheld RC 2.4 GHz No. of channels: 8 33116 Ficha De Dados

152 Program description: Telemetry menu

Once you have selected the appropriate menu line using 
the arrow buttons  of the left or right-hand four-way 
button …

… and then pressed the central 

 button of the right-

hand four-way button, the selected sub-menu appears:

Speech output is available via the headphone socket, 
but not until you have at least assigned a switch in the 
“REPEAT” line. This is accomplished as described in 
the section entitled “Assigning switches and control 
switches” on page 57:

All the time the assigned switch is closed, the last 
speech output is repeated for the period set to the left of 
the switch.
Simultaneously pressing the Select buttons  or 


 of the right-hand four-way button (

CLEAR) causes 

the time setting to revert to “10SEC”.

VOICE TRIGGER

TRIG
If you assign a switch in this line - preferably the mo-
mentary switch SW 1 - you can cycle through the voice 
outputs selected in the options “TRANSMITTER”, 
“RECEIVER” and under “Sensors”, as described in the 
following sections. 

VARIO
If you activate the “VARIO” (

) line in the “SELECT 

SENSOR” sub-menu, as described on page 150, you 
can use a switch assigned in this line to call up vario-
specific voice outputs, i.e. those triggered by altitude 
changes, such as “slow climb / descent” etc. via the 
transmitter’s earphone socket; these outputs are com-
pletely independent of the other voice messages.

TRANSFER
Select the desired menu line using the arrow buttons 


 of the left or right-hand four-way button …