DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC Ficha De Dados

©

 2014 DJI. All Rights Reserved. 

Aircraft

INSPIRE 1

  User Manual

DJI Intelligent Flight Battery Functions

1.  Battery Level Display: LEDs display the current battery level. 

2.  Battery Life Display: LEDs display the current battery power cycle. 

3. Auto-discharging Function: The battery automatically discharges to below 65% of total power when it 

is idle (press the power button to check battery level will cause battery to exit idle state) for more than 

10 days to prevent swelling. It takes around 2 days to discharge the battery to 65%.It is normal to feel 

moderate heat emitting from the battery during the discharge process. Discharge thresholds can be 

set in the DJI Pilot app.

4.  Balanced Charging: Automatically balances the voltage of each battery cell when charging.

5.  Over charge Protection: Charging automatically stops when the battery is fully charged. 

6.  Temperature Detection: The battery will only charge when the temperature is between 0 °C(32°F) and 

40°C (104°F). 

7.  Over Current Protection: Battery stops charging when high amperage (more than 10A) is detected. 

8.  Over Discharge Protection: Discharging automatically stops when the battery voltage reaches 18V to 

prevent over-discharge damage

9.  Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.

10.  Battery Cell Damages Protection: DJI Pilot app shows warning message when damaged battery cell 

is detected.

11.  Battery Information History: Show the last 32 entries of battery information records that include warning 

messages and so on.  

12.  Sleep Mode: Sleep mode is entered after 10 minutes of inactivity to save power. 

13.  Communication: Battery voltage, capacity, current, and other relevant information is provided to the 

aircraft’s to the main controller.

Refer to 

Disclaimer 

and

 Intelligent Flight Battery Safety Guidelins

 before use. Users take full 

responsibility for all operations and usage.

Battery must be fully charged before using it for the first time.  Refer to "Charging the Intelligent 

Using the Battery 

Powering ON/OFF

Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on. The 

Power LED will turn red and the Battery Level Indicators will display the current battery level. 

Powering Off: Press the Power Button once, then press again and hold for 2 seconds to power off.

LED1

LED2

LED3

LED4

Power Button

(Bulit-in LED)