ConiuGo 700100107 EasyGuard II 700100107 Manual Do Utilizador
Códigos do produto
700100107
30
Revision 9.0
GSM Alarm & Telemetry systems
•
NAME
The name of the incoming SMS is for your orientation.
•
TEXT
Here you define which content has to be written in the incoming SMS in or-
der to activate the GSM module. Carefully pay attention that to the use of
small initial letters and the use of capitals. The text of the incoming SMS
and the text of the stored SMS content in the module has to be abso-
lutely the same!
The GSM module will compare the text of the SMS with the stored SMS character by
character. The texts must agree completely, otherwise the command will not be
executed!
Please take into account that depending on the GSM provider
the SMS delivery may be delayed relevantly.
12.3 <A>ction Settings
Action Settings
----------------
<1> Send System Status
<2> Voice/Modem Connection
<3> Digital Outputs
<4> Outgoing SMS
<0> Main <M>enu
<Q>uit Configuration Mode
Your selection:
----------------
<1> Send System Status
<2> Voice/Modem Connection
<3> Digital Outputs
<4> Outgoing SMS
<0> Main <M>enu
<Q>uit Configuration Mode
Your selection:
Depending on the utilisation of the Processor, all actions may
have some seconds delay until executed.
<1> Send System status:
When cou choose this point a screen appears a screen appears with all possible
sending settings (send status 1 – 5). Choose one of the status to change the settings